Pump stations, dosing technology, control systems and irrigation systems for horticulture, agriculture and industry
ANDO Technik GmbH
HamburgNew on Amplifa
About ANDO Technik
ANDO Technik GmbH, based in Hamburg, is a specialist in electrical engineering, dosing technology and water technology. Since 1994, the company has been supplying tailor-made technology for water pumps, pressure boosting systems, pump controls, dosing technology and irrigation systems throughout Europe. In its own production facilities, pre-assembled, ready-to-connect and pre-configured pressure boosting systems and pump stations are manufactured – as standard units and custom-built, complete with matching control technology such as the in-house developed FluMaster pump and compressor controls. In addition, the company produces custom dosing tanks made of food-grade PE (300, 500 and 1,000 litres, with or without agitator) and converts sea containers into insulated technical containers with complete electrical and water technology. As a long-standing distribution partner of manufacturers such as EBARA, DOSATRON, TEFEN, NETAFIM, RAM, Genap and Zehnder, the company also covers centrifugal pumps, submersible pumps, borehole pumps, proportional dosers, drip irrigation, water silos and greenhouse automation. Customers come from horticulture, agriculture, trade, industry, municipalities, landscaping, livestock breeding and water treatment.
- Site
- Hamburg
- Processes
- Manufacture of custom pressure boosting systems and pump stations (in-house production), Pump stations with EBARA 3M centrifugal pumps in EN 733 process design, In-house development and production of custom control technology and complete systems, Planning, construction and installation of dosing systems (liquid dosing, fertiliser dosing), Production of custom dosing tanks and complete systems with/without agitator (300/500/1000, Conversion and fitting out of sea containers into insulated technical containers with electrical, Planning, installation and commissioning of irrigation systems and drip irrigation systems, Electrical installation (new greenhouse construction with assimilation lighting and lighting
- Materials
- Stainless steel 1.4301, Stainless steel AISI316, Grey cast iron, Food-grade PE (dosing tanks), PVC (suction lances), Special plastics (EBARA 4WN borehole pumps), Food-grade PE, PVC
- Certificates
- Pre-configuration and testing of systems before delivery
- Industries
- Horticulture, Agriculture, Trade, Industry, Municipalities, Landscaping
- 01
Expert consultation and requirements analysis
- 02
Engineering and design (pump/control system)
- 03
In-house production of pump stations, dosing tanks and controls
- 04
Pre-assembly, pre-configuration and testing
- 05
Delivery, installation and commissioning
- 06
Repair and spare parts service
Materials & Processes
Stainless steel 1.4301
Media-wetted parts of the EBARA 3M centrifugal pumps in the pump stations.
Stainless steel AISI316
Shafts and agitator blades as well as check valves of the dosing tank systems.
Grey cast iron
Housing material of centrifugal pumps and submersible pumps in heavy industrial design.
Food-grade PE
Material of the dosing and storage tanks in 300/500/1000 litres.
PVC
Suction lances of the dosing tanks with check valve made of AISI316.
Special plastics
Material components of the EBARA 4WN borehole pumps.
Location
Hamburg
DESales, engineering, production and assembly
- Lot size
- Single units up to small series
- Materials
- Stainless steel, grey cast iron, PE, PVC
- In-house production of pressure boosting systems and pump stations
- In-house development and production of the FluMaster controls
- Production of custom dosing tanks
- Container conversion into technical containers
Products & Systems
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Manufacture of custom pressure boosting systems and pump stations (in-house production)Assembly | – | – | – | – | Stainless steel, Grey cast iron |
| Pump stations with EBARA 3M centrifugal pumps in EN 733 process designAssembly | – | – | – | – | 1.4301 |
| In-house development and production of custom control technology and complete systemsEngineering | – | – | – | – | – |
| Planning, construction and installation of dosing systems (liquid dosing, fertiliser dosing)Engineering | – | – | – | – | – |
| Production of custom dosing tanks and complete systems with/without agitator (300/500/1000Plastics | – | – | – | – | food-grade PE, PVC, Stainless steel AISI316 |
| Conversion and fitting out of sea containers into insulated technical containers with electricalAssembly | – | – | – | – | – |
| Planning, installation and commissioning of irrigation systems and drip irrigation systemsAssembly | – | – | – | – | – |
| Electrical installation (new greenhouse construction with assimilation lighting and lightingAssembly | – | – | – | – | – |
| Repair and spare parts service for EBARA water pumps and DOSATRON dosersAssembly | – | – | – | – | – |
Quality
The pressure boosting systems and pump stations built in the company's own production are delivered completely pre-configured and tested. The systems are supplied ready-to-connect and are adjusted to the respective application before delivery.
| Evidence | Hamburg |
|---|---|
| Pre-configuration and testing of systems before delivery |
Company History
- 1994
Foundation of ANDO Technik GmbH in Hamburg
- ca. 1998
Start of the EBARA product range, which has been part of the portfolio for more than 25 years