Planning and realization of tank and shaft structures as well as water treatment plants for drinking water and wastewater.
Aqua System Technologie GmbH
Eberschwang, Upper Austria (AT)New on Amplifa
About Aqua System Technologie
Aqua System Technologie GmbH is a company based in Eberschwang in the Innviertel region of Upper Austria that has been planning environmental and industrial technologies since 1996 and realizing them as a general contractor. The product range includes drinking water reservoirs including pipework, spring shafts, spring collectors, valve chamber reservoirs, technical shafts, shaft and special structures, special fittings for sewer construction as well as the equipping of small wastewater treatment plants. Tanks are manufactured individually in stainless steel (pipe diameter 1000–4000 mm), GRP (800–3000 mm) and PP/PE-HD (800–3600 mm, rectangular from sandwich panels or as double-wall profile-wound pipe). Stainless steel tanks are pickled and passivated on the inside and protected against corrosion on the outside with a fiberglass insulation. In addition, the company supplies water treatment technology such as ultrafiltration, UV disinfection, deacidification and pressure boosting systems. The reservoirs can be placed underground in gravel – without a concrete foundation – or installed above ground and mounted including a prefabricated valve chamber. Customers include, among others, municipal utilities and regional authorities in Austria and Italy.
- Site
- Eberschwang
- Processes
- Stainless steel tank construction (drinking water reservoirs, spring collectors, valve chamber, GRP tank construction (spring shaft, well chamber, wastewater tank), PP/PE tank construction (rectangular tanks made of sandwich panels, double-wall profile-wound pipe), Water treatment – ultrafiltration systems, Water treatment – UV disinfection, Water treatment – pressure boosting systems, Water treatment – deacidification systems, Pickling and passivation of tanks inside
- Materials
- Stainless steel, GRP (glass-fiber reinforced plastic), PP, PE-HD, Fiberglass (insulation), Rounded gravel 4/8, Fiberglass insulation
- Certificates
- ÖVGW W1.599 (stainless steel drinking water reservoirs), ÖVGW W1.372 (GRP tanks), ÖVGW W1.687 (PP/PE tanks), TÜV testing / KVU testing, Structural calculation according to ATV 127 (GRP), 15,000-volt breakdown test
- Founded
- 1996
- Industries
- Drinking water supply, Wastewater disposal, Water treatment, Waterworks / municipal utilities
- 01
Planning and engineering
- 02
Tank manufacturing stainless steel / GRP / PP-PE
- 03
Tank pickling and passivation inside, fiberglass insulation
- 04
Equipping with pipework and valves
- 05
Assembly and commissioning incl. valve chamber
- 06
Water treatment: ultrafiltration, UV disinfection, deacidification, pressure
Materials & Processes
Stainless steel
Drinking water reservoirs, spring collectors and valve chamber reservoirs, pickled and passivated inside, insulated against corrosion on the outside with fiberglass, tested with 15,000 volt breakdown voltage.
GRP (glass-fiber reinforced plastic)
Individually manufactured spring shafts, well chambers and wastewater tanks with stainless steel pipework, structurally calculated according to ATV 127.
PP
Rectangular tanks made of sandwich panels and pipework for drinking water and wastewater.
PE-HD
Double-wall profile-wound pipes and tanks with low weight, with or without valve chamber.
Fiberglass insulation
Exterior protection of stainless steel tanks against corrosion.
Rounded gravel 4/8
Bedding material for reservoirs placed underground without a concrete foundation.
Site
Eberschwang
ATHeadquarters, administration and planning
- Part weight / size
- Pipe diameter up to 4000 mm (stainless steel)
- Lot size
- Custom manufacturing according to customer requirements
- Materials
- Stainless steel, GRP, PP, PE-HD
- Stainless steel tank construction
- GRP tank construction
- PP/PE tank construction
- Ultrafiltration systems
- UV disinfection
- Pressure boosting systems
- Deacidification systems
- Pickling and passivation
- Fiberglass insulation
- Assembly incl. valve chamber
Components & Products
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Stainless steel tank construction (drinking water reservoirs, spring collectors, valve chamberAssembly | – | Pipe diameter up to 4000 mm | – | – | Stainless steel |
| GRP tank construction (spring shaft, well chamber, wastewater tank)Plastics | – | Pipe diameter 800 mm to 3000 mm | – | – | GRP (glass-fiber reinforced plastic), Stainless steel (pipework) |
| PP/PE tank construction (rectangular tanks made of sandwich panels, double-wall profile-wound pipe)Plastics | – | Diameter 800 mm to 3600 mm | – | – | PP, PE-HD |
| Water treatment – ultrafiltration systemsEngineering | – | – | – | – | – |
| Water treatment – UV disinfectionEngineering | – | – | – | – | – |
| Water treatment – pressure boosting systemsEngineering | – | – | – | – | – |
| Water treatment – deacidification systemsEngineering | – | – | – | – | – |
| Pickling and passivation of tanks insideSurface treatment | – | – | – | – | Stainless steel |
| Fiberglass insulation of tanks (external corrosion protection)Surface treatment | – | – | – | – | GRP (fiberglass), Stainless steel |
| Individual manufacturing & customization, special fittings for sewer construction, shaft andEngineering | – | – | – | – | – |
| Assembly of finished tanks incl. valve chamber, pipework, installation underground or above groundAssembly | – | – | – | – | – |
Additional services
Reference customers
Quality & Certification
The drinking water reservoirs are ÖVGW-approved and certified according to ÖVGW guidelines W1.599, W1.372 and W1.687; the stainless steel reservoirs are TÜV-tested (No. Q1531207, KVU No. 103.003.13) and are tested with a 15,000 volt breakdown test.
| Evidence | Eberschwang |
|---|---|
| ÖVGW W1.599 (stainless steel drinking water reservoirs) | |
| ÖVGW W1.372 (GRP tanks) | |
| ÖVGW W1.687 (PP/PE tanks) | |
| TÜV testing / KVU testing | |
| Structural calculation according to ATV 127 (GRP) | |
| 15,000-volt breakdown test |
History
- 1996
Start of company operations: planning and realization of environmental and industrial technologies as a general contractor
- 2005
Foundation of Aqua System Verwaltungs GmbH in Eberschwang (12 January 2005)