Manufacture of molded rubber parts and rubber balls according to customer-specific elastomer compounds
August Pölkow & Söhne GmbH
Flensburg (Apenrader Straße 71)New on Amplifa
About us
August Pölkow & Söhne GmbH is a family-owned manufacturer of molded rubber parts headquartered in Flensburg. Founded in 1947, the company produces among other things seals and rings, rubber-to-metal bonds, caps, balls with and without boreholes, and suction balls. Various elastomers are processed, including natural rubber, SBR, EPDM, CR, NBR, H-NBR, FPM, IIR, polyurethane and silicone. The selection of polymers and compound ingredients is based on customer requirements, such as hardness, strength, rebound elasticity, abrasion resistance and chemical resistance. The company is certified to DIN EN ISO 9001:2015 and is regularly audited by DEKRA Certification GmbH.
- Site
- Flensburg
- Processes
- Manufacture of molded rubber parts and rubber balls (seals, rings, rubber-to-metal bonds,, Compound development according to customer requirements (elastomer selection)
- Materials
- Natural rubber, Styrene-butadiene rubber, Ethylene-propylene-diene rubber, Chloroprene rubber, Nitrile rubber, Hydrogenated nitrile rubber, Fluoro rubber, Butyl rubber
- Certificates
- DIN EN ISO 9001:2015, ISO 9001
- Founded
- 1947
- 01
Compound development according to customer requirements (elastomer selection)
- 02
Manufacture of molded rubber parts and rubber balls
Materials & Elastomers
Natural rubber
Elastomer for molded rubber parts with high rebound elasticity.
Styrene-butadiene rubber
Elastomer for molded rubber parts with good abrasion resistance.
Ethylene-propylene-diene rubber
Elastomer for molded parts with good resistance to environmental influences.
Chloroprene rubber
Elastomer for seals and rubber-to-metal bonds.
Nitrile rubber
Elastomer for seals with resistance to oils and fuels.
Hydrogenated nitrile rubber
Elastomer for higher stresses in sealing applications.
Fluoro rubber
Elastomer for molded parts with high temperature and chemical resistance.
Butyl rubber
Elastomer for molded parts with low gas permeability.
Polyurethane rubber
Elastomer for wear-resistant molded rubber parts.
Silicone
Elastomer for molded parts with a wide temperature range of use.
Site
Flensburg
DEHeadquarters and production
- Materials
- NR, SBR, EPDM, CR, NBR, H-NBR, FPM, IIR, PU, VMQ
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Manufacture of molded rubber parts and rubber balls (seals, rings, rubber-to-metal bonds,Plastics | – | – | – | – | NR, SBR, EPDM, CR, NBR, H-NBR, FPM, IIR, PU, VMQ |
Additional services
Quality
The company is certified to DIN EN ISO 9001:2015 and is regularly audited by DEKRA Certification GmbH (certificate registration no. 80399115/7).
| Evidence | Flensburg |
|---|---|
| ISO 9001 |
History
- 1919
August Pölkow founds a company for the production of wooden shoes.
- 1947
Foundation of August Pölkow und Söhne GmbH on 29.08.1947 in Flensburg for the manufacture of molded rubber parts.
- 2019
Handover of company management from Erk Pölkow to his children.