Technical distribution of epoxy systems, adhesives, composites, encapsulants and additives as well as DLP 3D printing services
Bodo Möller Chemie GmbH
Offenbach am Main · Vienna · Kruibeke · Winterthur · Stenløse · Helsinki · Ruaudin · Alforja (Tarragona) · Suchy Las · Brno · Tatabánya · Milan · Zagreb · Bucharest · Tartu · CairoNew on Amplifa
About Bodo Möller Chemie
Founded in 1975 in Offenbach am Main, Bodo Möller Chemie is an owner-managed family business and today an internationally active technical distributor of specialty chemicals with around 400 employees at more than 40 locations. The company distributes formulated epoxy systems, adhesives, encapsulants for electronics, composite and tooling materials as well as additives, pigments and raw materials for the coatings, plastics and textile industries. In addition to distribution, Bodo Möller Chemie offers technical consulting, training, customized application tests in its own laboratories and in the Adhesive Competence Center, a refill and formulating service, and DLP 3D printing services from design through test print and validation to small-series production. A production facility in Egypt is used to manufacture its own formulations. Customer industries include automotive, rail, aerospace, electrical/electronics, wind energy, shipbuilding and medical technology. The headquarters are located in Offenbach am Main; the group generated revenue of 266 million euros in 2025.
- Site
- Offenbach am Main
- Processes
- Adhesive systems / bonding as joining technology, Electronic casting & encapsulation (potting), Wet lay up (composites), Infusion (composites), Pultrusion, RTM, High pressure RTM, Filament winding
- Materials
- Epoxy (epoxy resin systems), Polyurethane, Silicone (casting silicones, thermally conductive materials), Carbon Fiber, Aramid Fiber, Glass Fiber, Ureol Tooling Boards, Araldite® Adhesives
- Certificates
- ISO 9001, ISO 14001, ISO 45001 / OHSAS 18001, DIN EN 9120 / AS 9120, DIN 6701-2 (A1/S1, adhesive laboratory Poland), DIN 2304-1 (adhesive laboratory Poland), ISO 45001, EN 9120, Other (DIN 6701-2, DIN 2304-1)
- Founded
- 1975
- Employees
- 400
- Industries
- Automotive, Rail, Aerospace, Electrical and Electronics Industry, Coatings and Paint Industry, Textile Industry
- 01
Technical consulting
- 02
Application tests in the laboratory / Adhesive Competence Center
- 03
Mixing & formulating (refill & formulating)
- 04
Decanting & customizing
- 05
DLP 3D printing from design to small-series production
- 06
Delivery
Materials & Processes
Epoxy Resin Systems
Formulated matrix systems for composites, bonding and encapsulation applications.
Polyurethane
Used for electronic potting and encapsulation applications.
Silicone / Casting Silicones
Thermally conductive materials and casting silicones for electronics and toolmaking.
Carbon Fiber
Reinforcing fiber for lightweight composite components in aerospace and automotive.
Aramid Fiber
Reinforcing fiber for high-load composite components.
Glass Fiber
Classic reinforcing fiber for composite components.
Ureol Tooling Boards
Tooling boards with high dimensional accuracy for models, tools and fixtures.
BERGQUIST® Thermal Interface Materials
Thermally conductive gap fillers, gap pads, SIL pads and HI-FLOW for electronics.
Liquid Silicone Rubber (LSR)
Raw material for elastomer molded parts in automotive and electrical applications.
High Consistency Rubber (HCR)
Raw material for the molding of elastomer parts.
DLP 3D Printing
Printing services with functional resins (PP/PE/ABS-like, UL 94 V-0) for prototypes and small series.
Conversion Coating / BONDERITE®
Pretreatment of metals as an alternative to phosphating for corrosion protection and paint adhesion.
Locations
Offenbach am Main
DEHeadquarters
- Materials
- Epoxy systems, adhesives, composites
- Adhesive Competence Center
Suchy Las
DESales office Poland with adhesive laboratory certified to DIN 6701-2 (A1/S1) and DIN 2304-1
- Materials
- Adhesives
- Application laboratory
Cairo
DESales office with production facility for own formulations (since 2015)
- Lot size
- custom quantities
- Materials
- Epoxy systems, formulations
- Formulation production facility
Shanghai
DEAdhesive Competence Center (since 2024)
- Materials
- Adhesives
- Adhesive Competence Center
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Adhesive systems / bonding as joining technologyJoining | – | – | – | – | Metal, Plastics, Hybrid materials, Glass |
| Electronic casting & encapsulation (potting)Joining | – | – | – | – | Epoxy, Polyurethane, Silicone |
| Wet lay up (composites)Plastics | – | – | – | – | Epoxy resin with carbon fiber, aramid, glass fiber |
| Infusion (composites)Plastics | – | – | – | – | Epoxy resin with carbon fiber, aramid, glass fiber |
| PultrusionPlastics | – | – | – | – | Epoxy resin with reinforcing fibers |
| RTMPlastics | – | – | – | – | Epoxy resin with reinforcing fibers |
| High pressure RTMPlastics | – | – | – | – | Epoxy resin with reinforcing fibers |
| Filament windingPlastics | – | – | – | – | Epoxy resin with reinforcing fibers |
| Compression moldingPlastics | – | – | – | – | Epoxy resin with reinforcing fibers |
| Dynamic fluid compression moldingPlastics | – | – | – | – | Epoxy resin with reinforcing fibers |
| Model & mold making (tooling board models, tools, fixtures, jigs)Plastics | – | – | – | – | Ureol tooling boards, Casting resins, Casting silicones, Gelcoats |
| Industrial cleaning / degreasing prior to paintingSurface | – | – | – | – | Metal, Sheet metal parts |
| Pickling/etchingSurface | – | – | – | – | Metal |
| Conversion coating (immersion/spraying) as an alternative to phosphatingSurface | – | – | – | – | Metal |
| Powder coating / cathodic dip painting (supplier processes supported with chemical products)Surface | – | – | – | – | Sheet metal parts, Metal |
| Special coatings (corrosion protection, sliding properties, heat resistance)Surface | – | – | – | – | Metal |
| DLP 3D printing (printing services for prototypes and series)Additive | – | – | – | Small series / mass production | Functional resins (PP-, PE-, ABS-like), UV-curing |
| Mixing/blending & formulatingEngineering | – | – | – | custom quantities (refill & | Epoxy systems, Adhesives |
| Decanting & customizingEngineering | – | – | – | – | – |
| Application tests in the laboratory / Adhesive Competence CenterTesting | – | – | – | – | – |
| Manufacture of elastomer molded parts from LSR/HCR raw materials (material supply forPlastics | – | – | – | – | Liquid Silicone Rubber (LSR), High Consistency Rubber (HCR) |
6 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| DLP 3D printing systems | – | – | – | – | – |
| Curing chambers (post-curing chambers for DLP) | – | – | – | – | – |
| Automatic cleaning stations for 3D printed parts | – | – | – | – | – |
| Production facility for formulating (manufacture of own formulations) | – | – | – | – | Egypt |
| Adhesive laboratory / application laboratory (DIN 6701-2 A1/S1, DIN 2304-1 certified) | – | – | – | – | Poland |
| Adhesive Competence Center | – | – | – | – | Shanghai, Offenbach and others |
Additional services
Reference customers
Quality & Certifications
All processes are certified to ISO 9001, ISO 14001 and ISO 45001 (OHSAS 18001). In addition, certifications according to DIN EN 9120 for aerospace as well as DIN 6701-2 (A1/S1) and DIN 2304-1 for the adhesive laboratory in Poland are in place.
| Evidence | Offenbach am Main |
|---|---|
| ISO 9001 | |
| ISO 14001 | |
| ISO 45001 | |
| EN 9120 | |
| Other (DIN 6701-2, DIN 2304-1) |
History
- 1975
Foundation of the headquarters in Offenbach am Main by Bodo Möller
- 2000
Frank Haug joins the company as Managing Director
- 2003
First branches in Austria and France
- 2005
Branch in Poland; Frank Haug becomes Chairman of the Management Board and shareholder
- 2008
Branches in Denmark, Finland, Sweden and Belgium
- 2009
New branch in Switzerland
- 2011
Branches in South Africa and Slovakia
- 2014
Branches in the Czech Republic and Russia; application laboratory in Poland
- 2015
Branches in Hungary, UAE, Egypt and China; entry into product formulating with production facility in Egypt
- 2016
Branches in Croatia, Morocco and India
- 2017
Branches in Hong Kong, Morocco, Israel, USA and Mexico
- 2018
Branches in the UK and Kenya
- 2020
Branch in Romania
- 2021
Branch in Spain
- 2022
Branches in Italy, Turkey, Portugal, Norway and Nigeria
- 2023
Branches in Estonia, Vietnam and Thailand
- 2024
Branches in Japan and South Korea; new Adhesive Competence Center in Shanghai
- 2025
Revenue of €266 million