Services for electronics manufacturing: component programming, Tape & Reel, assembly and engineering from Lindhorst.
cps Programmier-Service GmbH
Lindhorst (headquarters, production and administration)New on Amplifa
About us
cps Programmier-Service GmbH was founded in 1996 in Lindhorst and operates as an EMS service provider for industrial electronics manufacturing. Its core offering includes the programming of electronic components such as logic and memory devices, Flash and NAND memories, and sensors, including the configuration of current sensors (e.g. Infineon TLE4971, TLI4971, TLE4973, TLE4978). The company also offers Tape & Reel services: automatic singulation, detangling, correct-orientation-for-storage, taping and packaging of bulk material, SMD components, mechanical stamped parts and special shapes on blister tape. The portfolio is complemented by handling and assembly, laser marking, 3D measurement with optical quality inspection, DryPack and MSL-compliant handling, pre-assembly, and customer-specific logistics concepts. Since 2019 there has been an Engineering business unit with robot and PLC programming, simulation, commissioning, training and service, including 3D printing of gripper prototypes. Production runs in 3-shift operation with 24/7 availability and 100 % traceability. Customers come from the automotive supplier, industrial automation, consumer products and EMS sectors. In terms of production volume, more than 240 million programmed and over 1.6 billion packaged components and special shapes are documented.
- Site
- Lindhorst
- Processes
- Component programming (logic and memory devices, sensors, Flash and NAND memories), Tape & Reel (automatic singulation, taping, packaging), Handling and assembly of electronic components, Laser marking / laser engraving of components, 3D measurement / optical quality inspection (Vision Control), Pre-assembly of components, Robot and PLC programming (consulting, planning, simulation, commissioning, training), 3D printing of gripper/vacuum suction cup prototypes
- Materials
- Semiconductors, Sensors, Flash memories, NAND memories, Stamped parts, Current sensors, Semiconductors / ICs, Flash and NAND memories
- Certificates
- ISO 9001:2015, ISO/TS 16949, JEDEC IEC-EN 60286 / EIA 481-C, JEDEC J-STD-033B, JEDEC 625 ESD protection
- Founded
- 1996
- Industries
- Automotive supplier, Industrial automation, Consumer products, EMS companies
- 01
Incoming goods with scanning
- 02
Handling and singulation of components
- 03
Programming or configuration (devices, sensors)
- 04
Laser marking
- 05
3D measurement and optical quality inspection
- 06
Taping or packaging (Tape & Reel, blister)
- 07
Warehousing and logistics
- 08
Shipping incl. worldwide just-in-time delivery
Components and processed materials
Semiconductors / ICs
Programming of logic and memory devices with 3D measurement and 100 % traceability.
Flash and NAND memories
Programming on high-performance fully automatic machines and high-speed systems from prototype to high-volume series.
Sensors incl. current sensors
Configuration of customer-supplied sensors, e.g. Infineon TLE4971, TLI4971, TLE4973, TLE4978 (PG-TISON-8-5), on CGS programming systems.
Stamped parts, bushings and special shapes
Singulation, orientation and automatic taping on blister tape according to JEDEC IEC-EN 60286 and EIA 481-C.
Plastic (3D printing)
Prototypes of grippers and vacuum suction cups for robotics are manufactured and tested using 3D printing.
Sites
Lindhorst
DEHeadquarters, production and administration
- Lot size
- Prototype to high-volume series
- Materials
- Semiconductors, sensors, memories, stamped parts, plastic
- Data I/O PSV7000 programming and handling machine with 3D camera
- Fully automatic taping machines (V-Tek / VITEK / AMTEC.PRO)
- Vision Q.400 camera station (Q.VITEC)
- Sensor programming systems from CGS GmbH
- Mitsubishi MELFA industrial robots
- 3D printers
- 17 programming and automation systems
- Photovoltaic system
Components and services
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Component programming (logic and memory devices, sensors, Flash and NAND memories)Assembly | – | – | – | Prototype – High-volume series | Semiconductors, Sensors, Flash memories, NAND memories |
| Tape & Reel (automatic singulation, taping, packaging)Assembly | – | – | – | Small series – High-volume series | Stamped parts, Bulk material, SMD components, Special shapes |
| Handling and assembly of electronic componentsAssembly | – | – | – | – | Electronic components |
| Laser marking / laser engraving of componentsSurface | – | – | – | – | Electronic components, Sensors |
| 3D measurement / optical quality inspection (Vision Control)Testing | PIN length measurement +/- 0.2 mm | – | – | – | ICs, Electronic components |
| Pre-assembly of componentsAssembly | – | – | – | – | Components |
| Robot and PLC programming (consulting, planning, simulation, commissioning, training)Engineering | – | – | – | – | – |
| 3D printing of gripper/vacuum suction cup prototypesAdditive | – | – | – | – | Plastic |
| Sensor programming/configuration (e.g. current sensors TLE4971, TLI4971, TLE4973, TLE4978)Assembly | – | – | – | – | Current sensors, Sensors (PG-TISON-8-5) |
| DryPack and MSL-compliant handlingAssembly | – | – | – | – | Semiconductors |
7 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Programming and handling machine | Data I/O PSV7000 (with 3D camera) | – | – | – | Lindhorst |
| Fully automatic taping machines (Tape & Reel) | VITEK / AMTEC.PRO / V-Tek | – | – | – | Lindhorst |
| Programming and automation systems (total) | – | 17 | – | – | Lindhorst |
| Sensor programming systems | CGS GmbH | – | – | – | Lindhorst |
| Machine vision system (camera station) | Q.VITEC Vision Q.400 | – | – | – | Lindhorst |
| Industrial robot (MELFA) | Mitsubishi MELFA | – | – | – | Lindhorst |
| 3D printer | – | – | – | – | Lindhorst |
Additional services
Quality and certifications
cps operates according to ISO 9001:2015 (certified by DEKRA, valid until 11.07.2028) as well as the standards JEDEC IEC-EN 60286 and EIA 481-C (taping), JEDEC J-STD-033B (packaging) and JEDEC 625 (ESD protection). An HD camera station with Vision Q.400 monitors the Tape & Reel process with 100 % inspection and pin length measurement with ±0.2 mm tolerance, and all components and lots are fully traceable.
| Evidence | Lindhorst |
|---|---|
| ISO 9001:2015 | |
| ISO/TS 16949 | |
| JEDEC IEC-EN 60286 / EIA 481-C | |
| JEDEC J-STD-033B | |
| JEDEC 625 ESD protection |
History
- 1996
Foundation of cps Programmier-Service GmbH in Lindhorst by Bernd Thürnau
- 1999
First ISO 9001 certification
- 2002
First ISO/TS 16949 certification
- 2005
Introduction of ERP software
- 2006
Expansion: taping of mechanical stamped parts and special shapes (blister)
- 2007
Expansion through customer-specific logistics concepts
- 2008
Relocation to a new, expanded production site in Lindhorst
- 2012
Expansion through pre-assembly of components; installation of a photovoltaic system
- 2016
20th anniversary; HD camera station developed for 100% quality assurance in Tape & Reel (with PRAUTEC/Q.VITEC)
- 2018
Member of Cluster Mechatronik & Automation; ISO 9001:2015 certification by SGS EC Hamburg; acquisition of another Data I/O PSV7000
- 2019
Expansion through the Engineering business unit (robot and PLC programming)
- 2020
Presence at NORTEC in Hamburg (joint booth Electronics Manufacturing)
- 2021
25th company anniversary
- 2023
Expansion of production and warehouse space (new warehouse building) and of the photovoltaic system
- 2025
Expansion of services: programming of current sensors; new ISO 9001 certificate (DEKRA)
- 2026
Participation in electronica 2026 in Munich (together with REHAG ELEKTRONIK GmbH, Hall C3, Booth 441)