Development and production of radio remote controls, motor controls and custom electronics as an EMS/E2MS service provider.
Dickert Electronic GmbH
Cölbe-Schönstadt (headquarters, development, production, logistics)New on Amplifa
About Dickert Electronic
Dickert Electronic GmbH was founded in 1984 by Hans Dickert and is a family-owned, owner-managed company in Cölbe-Schönstadt near Marburg with around 70 employees. The company develops and produces custom, CE-TÜV-VdS-compliant electronics for radio remote controls, motor controls and residential and industrial applications. In addition to its own product portfolio, Dickert Electronic offers electronics development, material procurement, SMD and THT assembly, selective soldering, conformal coating, potting, programming, final inspection, assembly and logistics as an EMS and E2MS full-service provider. Production covers order quantities from prototypes to 100,000 assemblies per year; each year around 800,000 controllers and approximately 300,000 hand transmitters in over 300 variants leave the factory. Customers include market-leading companies worldwide from the gate and fencing industry, water management, elevator technology, alarm and security systems, building technology, photovoltaics and mechanical engineering. Power supply is provided predominantly by its own photovoltaic systems and purchased green electricity.
- Site
- Cölbe-Schönstadt
- Processes
- Electronics development (hardware, software, layout, circuit design), EMS / E2MS full service, Material procurement / purchasing, SMD and THT assembly, Selective soldering, Conformal coating, Potting, Programming
- Materials
- SMD assembly, THT assembly, Reflow soldering, Wave soldering, Selective soldering, Aluminium PCB assembly, Conformal coating, Potting
- Certificates
- ISO 9001:2015, ISO 14001:2015, BSFZ-Forschungssiegel, BSFZ research seal
- Founded
- 1984
- Employees
- 70
- Industries
- Gate, barrier and fencing industry, Water management, Elevators/lifts, Alarm and security technology, Locking systems, Building automation
- 01
Electronics development (hardware, software, layout)
- 02
Material procurement / purchasing
- 03
SMD and THT assembly
- 04
Soldering (reflow, wave, selective)
- 05
PCB cleaning
- 06
Conformal coating / potting
- 07
Programming
- 08
Testing (AOI, ICT, functional test)
- 09
Assembly / final inspection
- 10
Packaging / logistics / ESD-compliant delivery
- 11
Repair service
Processes and Technologies
SMD assembly
Automatic SMD assembly from component size 0201 (0.6 × 0.3 mm) up to 40 × 40 mm including BGA for small, medium and large series.
THT assembly
Through-hole assembly with THT/SMD AOI before and after soldering for series production.
Reflow soldering
Nitrogen reflow soldering oven with paste printer and paste inspection (SPI) for series production.
Wave soldering
Nitrogen wave soldering system for series production.
Selective soldering
Nitrogen selective soldering system with precise individual control of solder joints.
Aluminium PCB assembly
Assembly of aluminium PCBs for high-power electronics and thermal management.
Conformal coating
Selective conformal coating with up to 4 applicators, automatic quantity monitoring and logging.
Potting
Fully automatic potting and coating system for protection under harsh operating conditions.
Site
Cölbe-Schönstadt
DEHeadquarters, development, production, logistics
- Lot size
- Prototype to 100,000 assemblies per year
- Materials
- SMD, THT, aluminium PCBs
Components and Products
Inside the production
Industries
Additional services
Quality and Certification
Production follows standardized processes with ESD-compliant handling from incoming components to outgoing goods, a continuous traceability system, and AOI, ICT and functional final tests. The company has been a member of the BHE since 2011 and is certified through the association under ISO 9001:2015 and ISO 14001:2015.
| Evidence | Cölbe-Schönstadt |
|---|---|
| ISO 9001:2015 | |
| ISO 14001:2015 | |
| BSFZ research seal |
History
- 1984
Company founded by Hans Dickert
- 1992
Move into a 500 m² building at the Schönstadt site
- 1997
Conversion of legal form to a GmbH
- 1998
Expansion of production area to 1,500 m²
- 2008
Installation of a 40 kWp photovoltaic system
- 2011
ISO 9001 certificate
- 2012
Start of production of the Funk Q series with QuickLearn function
- 2016
4 million Dickert hand transmitters in circulation worldwide
- 2019
5 million Dickert hand transmitters in circulation worldwide
- 2021
€3 million investment in new production equipment
- 2022
€5 million investment: new building/extension, production area 4,500 m², 150 kWp PV system with 220 kWh storage
- 2024
ISO 14001 certificate + BSFZ research seal
- 2026
Renewed award of the BSFZ research seal