Skip to content
NEW: CREATE AN AI-ASSISTED TENDER IN 2 MINUTES — TRY IT FREE
Back to search
DIM International – Fertigung

Family-owned specialist trader and configurator of laser welding wires and welding filler materials for toolmaking, apparatus engineering and aerospace.

DIM International Logo

DIM Schweißmaterial – DIM International

Nordstemmen (DE)New on Amplifa

1996Founded
1Location (Nordstemmen)
Ø 0.1–1.0 mmWire diameters of the laser welding wires
12Website languages / international sales

About DIM International

Founded in 1996 by Manfred Schiermann, the family-owned company DIM (DIM Schweißmaterial, sole proprietorship) based in Nordstemmen specializes in laser welding wires and welding filler materials. The product range covers a broad spectrum of welding fillers: high- and low-alloy steels, tool steels (including 1.2311/1.2312, 1.2343/1.2344, 1.2083), stainless steels (1.4301, 1.4404, 1.4462 duplex, 1.4571, 17-4 PH), aluminium alloys (AlSi5, AlSi12, AlMg3, AlMg4,5Mn), nickel and cobalt superalloys (Inconel 625, Hastelloy C-22, C276, Stellite 21-type CoCr alloys), titanium and copper alloys as well as special materials such as Invar 36 and Kovar. Wire diameters range from 0.1 to 1.0 mm. DIM supplies spools of various sizes as well as straightened rods in customer-specified lengths and carries out customized configuration – from small to large orders. Only tested welding fillers from manufacturers certified to DIN EN ISO 9001 are supplied; works certificates and acceptance inspection certificates according to DIN EN 10204 are available on request. Target industries include tool and mould making, chemical apparatus engineering, medical and dental technology, marine technology, aerospace, motorsport as well as turbine construction and mechanical engineering. Sales are conducted directly and internationally.

Site
Nordstemmen
Processes
Laser welding / laser pulse welding (welding filler materials), Configuration of laser welding wires (spools, straightened rods), Consulting/expert advice, Customized configuration (quantities, lengths, delivery forms, spools or straightened rods), Packaging and labelling options, Works certificates / acceptance inspection certificates according to DIN EN 10204 on request, Data sheets on request, Direct sales
Materials
Welding wire DIM L-3K56 (EN ISO G46 2 C G4Si1), DIM L-Dimalloy, DIM L-6 NIM, DIM L-10, DIM L-11, DIM L-13, DIM L-17, DIM L-18
Certificates
ISO 9001 (certification of the welding material manufacturers/upstream, DIN EN ISO 9001, Acceptance inspection certificates DIN EN 10204, Works certificates, In-house inspection of all batches
Founded
1996
Industries
Tool and mould making, Chemical apparatus engineering, Medical and dental technology, Marine/maritime technology, Aerospace, Motorsport
  1. 01

    Expert advice and material selection

  2. 02

    Delivery of tested welding filler materials (ISO 9001-certified manufacturers)

  3. 03

    In-house inspection of the welding fillers

  4. 04

    Customized configuration (quantities, lengths, spools or straightened

  5. 05

    Packaging, labelling and shipping

  6. 06

    Direct sales incl. works certificates on request

Location

Standort Nordstemmen

Nordstemmen

DE

Headquarters, warehouse and configuration of laser welding wires

Lot size
Small to large orders
Materials
Steels, stainless steels, aluminium, nickel, cobalt, titanium and copper alloys
  • Configuration of spools and straightened rods
  • Stockkeeping of all welding filler materials
  • In-house inspection of the welding fillers

Welding filler materials

Laser welding wires on spools and as straightened rods
Laser welding wires on spools and as straightened rodsConfiguration · Toolmaking
Welding fillers for tool and mould making
Welding fillers for tool and mould makingWire · Tool and mould making
Welding fillers for chemical apparatus engineering as well as medical and dental technology
Welding fillers for chemical apparatus engineering as well as medical and dental technologyWire · Chemical apparatus engineering
Welding fillers for turbines and combustion chambers
Welding fillers for turbines and combustion chambersWire · Turbine construction
Welding fillers for superalloys, marine technology and aerospace
Welding fillers for superalloys, marine technology and aerospaceWire · Aerospace

Inside the production

Works certificate DIM L-20 (German)
Works certificate DIM L-20 (German)
Factory certification DIM L-20 (English)
Factory certification DIM L-20 (English)
Data sheet DIM L-13
Data sheet DIM L-13
Data sheet DIM L-13 laser welding wire
Data sheet DIM L-13 laser welding wire
Catalogue DIM laser welding wires
Catalogue DIM laser welding wires
Quality seal DIM International laser welding wires
Quality seal DIM International laser welding wires
DIM laser welding wires
DIM laser welding wires
DIM Laser Welding Wires
DIM Laser Welding Wires

Industries

Tool and mould makingChemical apparatus engineeringMedical and dental technologyMarine/maritime technologyAerospaceMotorsportTurbine constructionMechanical engineeringElectrical engineeringTurbine/turborotor parts and combustion chambers

Processes & technical limits

ProcessesToleranceMax. partWeightLot sizeMaterials
Laser welding / laser pulse welding (welding filler materials)Joining––––Steels, Stainless steels, Aluminium alloys, Copper alloys, Titanium alloys, Nickel alloys, Cobalt alloys, Superalloys
Configuration of laser welding wires (spools, straightened rods)Joining–––small orders – large ordersLaser welding wires Ø 0.1 mm to 1.0 mm

Additional services

Consulting/expert adviceCustomized configuration (quantities, lengths, delivery forms, spools or straightened rods)Packaging and labelling optionsWorks certificates / acceptance inspection certificates according to DIN EN 10204 on requestData sheets on requestDirect sales

Tested quality

DIM exclusively stocks welding filler materials from manufacturers certified to DIN EN ISO 9001 and subjects all welding fillers to an in-house inspection. Works certificates as well as acceptance inspection certificates according to DIN EN 10204 and detailed data sheets are available on request for all materials and batches.

EvidenceNordstemmen
DIN EN ISO 9001
Acceptance inspection certificates DIN EN 10204
Works certificates
In-house inspection of all batches

History

  1. 1996

    Founding of the company DIM by Manfred Schiermann after decades of activity in toolmaking, welding technology and metallurgy.

Personalised demo

Ready to see Amplifa Marketplace in action?

From a structured request to the right manufacturing partner: AI-assisted matching, verified suppliers and transparent metrics — in one place for industrial companies across the DACH region.

Request a demo