Manufacturer of 15 mm thin clinker, brick and tile slips, made in own production in Selters

Dipl.-Ing. Schoppe - Riemchenwerk

Selters (Niederselters), GermanyNew on Amplifa

1983Founded

Selters (Niederselters)Location

approx. 25 kg/m²Weight of the slips

over 40 yearsExperience with clinker and brick

About Riemchenwerk

Dipl.-Ing. Schoppe - Riemchenwerk is a family company based in Selters (Taunus) that has been active in the field of clinker and facade systems since 1983. The company manufactures clinker, brick and tile slips in its own production: the facing slips, only approx. 15 mm thin, are cut from genuine clinker bricks fired at around 1,100 °C, as well as matching angle slips. The range is complemented by solid clinker bricks, paving clinker bricks, wood slips and accessories such as adhesive mortar, primer and joint sand. The slips are used on house facades and on external thermal insulation composite systems (ETICS), as well as for interior walls, kitchens, fireplaces, floors, gastronomy and shopfitting. In addition to production, the company sells via its own online shop, provides practical advice, arranges installers and supplies retailers with sample boards and catalogues. In Selters, production, warehouse, office and a showroom are located at one site.

Site: Selters
Processes: Manufacture of clinker/brick/tile slips from genuine clinker bricks (slips are cut from the, Firing of clinker bricks at approx. 1,100 °C, Manufacture of angle slips, Installation/processing of clinker slips on construction sites (ETICS, facades, interior walls), Cutting of slips (processing service/guide), Consulting (practical, project-related), Sample orders, Individual quotations / measurement support
Materials: Clinker, Brick/Tile, Hand-moulded brick, Sand-lime brick, Wood (wood slips), Wood slips
Certificates: Trusted Shops certification
Founded: 1983
Industries: Construction companies, Architecture/planning, Building materials trade, Gastronomy/shopfitting, Private customers (residential construction), Retail (building materials trade)

01
Firing of the clinker at approx. 1,100 °C
02
Cutting of the slips from genuine clinker bricks in own production
03
Manufacture of angle slips
04
Storage and order picking
05
Shipping via the online shop
06
Consulting, measurement support and arrangement of installers

Materials & Processes

Clinker

Clinker fired at approx. 1,100 °C, from which the approx. 15 mm thin slips are cut.

Brick/Tile

Basis for antique and retro slips with a kiln-fired look for interior and exterior walls.

Hand-moulded brick

Hand-moulded surfaces for rustic slip and solid brick varieties.

Sand-lime brick

Slip variant historically used in facade system construction.

Wood slips

Supplementary range for wall and floor designs made of wood.

Locations

Selters (Niederselters)

Headquarters with production, warehouse, office and showroom

Materials: Clinker, brick, tile, hand-moulded brick, wood

Components & Products

**Brick slips Antique noble**Slips cut from genuine clinker bricks · Facade/interior wall

**Brick slips Antique yellow**Kiln-fired surface · Living space/gastronomy

**Brick slips Antique black**Slips cut from clinker bricks · Facade/fireplace

**Clinker window sill**Precast clinker element · Outdoor area

**Brick slips Antique historical multicoloured**Slips cut from genuine bricks · Interior/exterior wall

Inside the production

Clinker slips Antique vintage as facade on a new building

Single-family house with slips of the Antique classic variety

Kitchen wall made of brick slips Antique noble

Slips Antique black as heat protection on the fireplace

Brick slips Antique yellow in a coffee roastery

Courtyard wall with brick slips Antique historical multicoloured

Residential house with garden and slips Antique black-red-white

Modern kitchen wall made of red clinker slips

Industries

Construction companiesArchitecture/planningBuilding materials tradeGastronomy/shopfittingPrivate customers (residential construction)Retail (building materials trade)Private customers (residential construction, interior and exterior wall design)

Processes & technical limits

Processes	Tolerance	Max. part	Weight	Lot size	Materials
Manufacture of clinker/brick/tile slips from genuine clinker bricks (slips are cut from theProcessing of mineral materials	–	–	25 kg/m² (slips)	–	Clinker, Brick, Tile, Hand-moulded brick
Firing of clinker bricks at approx. 1,100 °CHeat treatment	–	–	–	–	Clay/Clinker
Manufacture of angle slipsProcessing of mineral materials	–	–	–	–	Clinker
Installation/processing of clinker slips on construction sites (ETICS, facades, interior walls)Assembly	–	–	–	–	Clinker slips, Sand-lime brick slips
Cutting of slips (processing service/guide)Processing of mineral materials	–	–	–	–	Clinker slips

Additional services

Consulting (practical, project-related)Sample ordersIndividual quotations / measurement supportArrangement of installers (tilers, drywall installers, bricklayers, shopfitters, etc.)Supply of retailers (sample boards, flyers, image catalogue)Virtual slip plannerSlip guides and laying instructionsManufacture of individual slip varieties on requestOnline shop sales

Quality

The company's own production gives it control over the quality, price and availability of the slips. The online shop is Trusted Shops certified.

Evidence	Selters (Niederselters)
Trusted Shops certification

History

1983
Founded by Fritz Schoppe in Hofheim-Langenhain; focus on facade systems predominantly with clinker and sand-lime brick slips.
1990
Relocation to Niederselters (Taunus); specialisation in clinker and brick slips on external thermal insulation composite systems (ETICS).
2008
Handover to the next generation and start of own manufacturing of clinker slips and angle slips.
2014
Launch of the online shop as well as expansion of production and warehouse.
2023
New office and showroom premises in Selters.
2026
Family company with over 40 years of experience; production, shop and showroom from a single source.