Engineering service provider for plant commissioning, PLC and robot programming in industrial production
DMC Stuttgart GmbH
Esslingen am Neckar · StuttgartNew on Amplifa
About DMC Stuttgart
DMC Stuttgart GmbH is an engineering service provider based in Esslingen am Neckar that supports industrial companies with the commissioning, programming and optimization of production systems. The range of services includes plant commissioning including communication infrastructure, tool calibration and test runs, PLC programming with Siemens Simatic Step 7/TIA Portal, Beckhoff TwinCAT and Allen-Bradley RSLogix 5000, as well as robot programming for KUKA, ABB, FANUC, COMAU, MOTOMAN and Stäubli – online and offline with tools such as Delmia V5 and Process Simulate. In addition, the company offers process conception, process analysis, cycle time optimization in ghost operation, production support, training, and process know-how in welding, brazing, joining, bonding and handling technology. Customers come primarily from automotive engineering/vehicle production and general industry.
- Site
- Esslingen am Neckar
- Processes
- Commissioning of production systems, Online programming of robots (ABB IRC5, FANUC, KUKA VKRC 1), Robot programming KUKA, COMAU, ABB, FANUC, MOTOMAN, Stäubli incl. SafeZone technology, Process concept development, process analysis and process optimization, Production support, test runs and commissioning assistance, Stud welding, Brazing / Laser welding (Laser Brazing / Laser Welding), MIG/MAG welding and brazing
- Materials
- Siemens Simatic Step 7 / TIA Portal, Beckhoff TwinCAT V2/V3, Allen-Bradley RSLogix 5000, KUKA Robot Programming, ABB Robot Programming, FANUC Robot Programming, Offline Programming Delmia V5 / Process Simulate, Bus/Profinet Configuration
- Founded
- 2007
- Employees
- 11–50
- Industries
- Automotive Engineering/Vehicle Production, General Industry
- 01
Process conception and process analysis
- 02
Offline/online programming of PLCs and robots
- 03
Simulation and proof of concept
- 04
Plant commissioning and test runs
- 05
Production support and cycle time optimization
- 06
Training of customer staff
Technologies and Systems
Siemens Simatic Step 7 / TIA Portal
PLC programming for Siemens controllers of the S7-1500, S7-1200, S7-300 and S7-400 series.
Beckhoff TwinCAT V2/V3
Control programming for Beckhoff automation systems.
Allen-Bradley RSLogix 5000
PLC programming for Allen-Bradley/Rockwell Automation controllers.
KUKA Robot Programming
Robotics programming incl. KUKA VKRC 1 and SafeZone technology.
ABB Robot Programming
Online programming of ABB robots, among others with IRC5.
FANUC Robot Programming
Programming and commissioning of FANUC robots.
Offline Programming Delmia V5 / Process Simulate
Offline planning and simulation of robot cells in Delmia V5 and Process Simulate.
Bus/Profinet Configuration
Configuration of all common service buses and Profinet in production communication.
Welding, Brazing and Joining Processes
Process know-how for Stud Welding, Laser Brazing/Welding, MIG/MAG, clinching, roll seaming and bonding.
Locations
Esslingen am Neckar
DEHeadquarters
Stuttgart
DELocation (previous address)
Service Areas
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Commissioning of production systemsEngineering | – | – | – | – | – |
| Engineering | – | – | – | – | – |
| Engineering | – | – | – | – | – |
| Online programming of robots (ABB IRC5, FANUC, KUKA VKRC 1)Engineering | – | – | – | – | – |
| Robot programming KUKA, COMAU, ABB, FANUC, MOTOMAN, Stäubli incl. SafeZone technologyEngineering | – | – | – | – | – |
| Process concept development, process analysis and process optimizationEngineering | – | – | – | – | – |
| Production support, test runs and commissioning assistanceAssembly | – | – | – | – | – |
| Stud weldingJoining | – | – | – | – | – |
| Brazing / Laser welding (Laser Brazing / Laser Welding)Joining | – | – | – | – | – |
| MIG/MAG welding and brazingJoining | – | – | – | – | – |
| ClinchingJoining | – | – | – | – | – |
| Seaming / Roll SeamingJoining | – | – | – | – | – |
| BondingJoining | – | – | – | – | – |
| Seal bondingJoining | – | – | – | – | – |
| Seam sealingSurface | – | – | – | – | – |
| Spray bondingJoining | – | – | – | – | – |
| Vision systems (Handling)Testing | – | – | – | – | – |
| PalletizingAssembly | – | – | – | – | – |
| CuttingMachining | – | – | – | – | – |
| Cycle time analysis in ghost operationEngineering | – | – | – | – | – |
| Cycle time optimization offline and onlineEngineering | – | – | – | – | – |
| Service bus / Profinet configurationEngineering | – | – | – | – | – |
| Training and instruction of staff in new technologies and systemsEngineering | – | – | – | – | – |
9 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Industrial robot (programming/commissioning) | KUKA | – | – | – | – |
| Industrial robot (programming/commissioning) | ABB IRC5 | – | – | – | – |
| Industrial robot (programming/commissioning) | FANUC | – | – | – | – |
| Industrial robot (programming/commissioning) | MOTOMAN | – | – | – | – |
| Industrial robot (programming/commissioning) | COMAU | – | – | – | – |
| Industrial robot (programming/commissioning) | Stäubli | – | – | – | – |
| PLC/Controller | Siemens Simatic Step 7 / TIA Portal | – | – | – | – |
| PLC/Controller | Beckhoff TwinCAT V2 / TwinCAT V3 | – | – | – | – |
| PLC/Controller | Allen-Bradley/Rockwell Automation RSLogix 5000 | – | – | – | – |
Additional services
History
- 2007
Articles of association dated 31.05.2007; registration of the GmbH with registered office in Stuttgart and €25,000 share capital on 26.06.2007, managing director Željko Petrović (LinkedIn states founding in 2008)
- 2023
Relocation of registered office to Esslingen am Neckar on 16.11.2023