Services, laser modules and application development for industrial CO2 laser technology incl. high-performance microscopy laboratory
Dr. Bohrer Lasertec GmbH
Neusiedl am See (AT)New on Amplifa
About Dr. Bohrer Lasertec
Dr. Bohrer Lasertec GmbH was founded in 2006 by Dr. Markus Bohrer in Neusiedl am See and specializes in industrial laser technology. The company is organized into four business areas: Services, Sources, Solutions and Sight. In the Services area, the company offers general overhaul and refurbishment of sealed-off CO2 lasers up to 1.0 kW, including CO2 laser gas refill and repair of RF electronics across several laser manufacturers. In the Sources area, the company develops and manufactures its own CO2 reference laser source with beam guidance and beam shaping components, ready-made laser modules including control electronics for OEMs, as well as radio-frequency power amplifiers and retrofit packages for existing CO2 laser systems. In the Solutions area, the company performs laser evaluation, application development and ultra-fast industrial laser engraving. In the Sight area, the company operates a high-performance microscopy laboratory with scanning electron and ion beam microscopes as well as X-ray spectroscopy for analyses down to the nanometer range. The company operates on approximately 1000 m² of operating floor space in the Neusiedl Technology Center (TZN) and is certified according to ISO 9001:2015 and ISO 13485:2016.
- Site
- A-7100 Neusiedl am See
- Processes
- General overhaul/refurbishment of sealed-off CO2 lasers up to 1.0 kW, CO2 Laser Gas Refill, CO2 Laser RF Electronics Repair, Ultra-fast Laser Engraving (industrial laser engraving), Laser evaluation, solutions and application development (laser source, beam guidance, beam shaping,, Manufacture of laser-ready modules (laser source, beam guidance, optics, control electronics) as, Scanning electron and ion beam microscopy, X-ray spectroscopy, analysis down to the nanometer range
- Materials
- General overhaul of sealed-off CO2 lasers up to 1.0 kW, Ultra-fast Laser Engraving, Own CO2 reference laser source, Laser modules and optomechanics, Radio-frequency power amplifiers, Scanning electron and ion beam microscopy, X-ray spectroscopy
- Certificates
- ISO 9001:2015, ISO 9001:2015 (IQNet), ISO 13485:2016 (medical devices)
- Founded
- 2006
- Industries
- Industrial laser technology, Medical technology (medical device QM), OEMs and system integrators, Research & development, Aerospace (NASA testimonial), Automotive industry (via MTU/DaimlerChrysler testimonial)
- 01
Laser evaluation and application development
- 02
Design and production of laser modules, optomechanics and RF power amplifiers
- 03
Refurbishment and general overhaul of CO2 lasers up to 1.0 kW
- 04
Quality inspection incl. scanning electron/ion beam microscopy and
- 05
Exclusive service contracts for OEMs and integrators
Processes and Competencies
General overhaul of sealed-off CO2 lasers up to 1.0 kW
General overhaul and refurbishment of sealed-off CO2 lasers, including gas refill and RF electronics repair.
Ultra-fast Laser Engraving
Industrial laser engraving with correlative, ultra-fast processing as a core application.
Own CO2 reference laser source
In-house developed CO2 laser source with beam guidance and beam shaping as the basis for modules and retrofit packages.
Laser modules and optomechanics
Ready-made laser modules including laser source, beam guidance, optics and control electronics for OEMs.
Radio-frequency power amplifiers
RF power amplifiers for OEMs and repair of RF electronics from various CO2 laser manufacturers.
Scanning electron and ion beam microscopy
Analysis of laser results down to the nanometer range in the company's own high-performance microscopy laboratory.
X-ray spectroscopy
X-ray spectroscopic analysis as part of the microscopy laboratory.
Location
Neusiedl am See
ATHeadquarters: Service, Design & Production, R&D, microscopy laboratory
- Materials
- CO2 laser technology, optics, mechatronics, RF technology
- Scanning electron and ion beam microscopes
- X-ray spectrometers
- Own CO2 reference laser source with beam guidance and beam shaping
- CO2 laser service capacity up to 1.0 kW
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| General overhaul/refurbishment of sealed-off CO2 lasers up to 1.0 kWEngineering | – | – | – | – | – |
| CO2 Laser Gas RefillEngineering | – | – | – | – | – |
| CO2 Laser RF Electronics RepairEngineering | – | – | – | – | – |
| Ultra-fast Laser Engraving (industrial laser engraving)Engineering | – | – | – | – | – |
| Laser evaluation, solutions and application development (laser source, beam guidance, beam shaping,Engineering | – | – | – | – | – |
| Manufacture of laser-ready modules (laser source, beam guidance, optics, control electronics) asEngineering | – | – | – | – | – |
| Scanning electron and ion beam microscopyInspection | – | – | – | – | – |
| X-ray spectroscopy, analysis down to the nanometer rangeInspection | – | – | – | – | – |
4 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Scanning electron and ion beam microscopes | – | – | – | – | Neusiedl am See, Austria |
| X-ray spectrometers | – | – | – | – | Neusiedl am See, Austria |
| Own CO2 reference laser source with beam guidance and beam shaping components | Dr. Bohrer Lasertec | – | – | – | Neusiedl am See, Austria |
| CO2 laser service capacity up to 1.0 kW (general overhaul, approx. 1000 m² operating floor space) | – | – | – | – | Neusiedl am See, Austria |
Additional services
Reference customers
Quality and Certification
The company is certified according to ISO 9001:2015 (first issued 16 May 2017, Quality Austria, registration 19062/0) and ISO 13485:2016 for medical devices (first issued 04 August 2022, registration 00398/0). Quality assurance also includes a high-performance microscopy laboratory with scanning electron and ion beam microscopes as well as X-ray spectroscopy down to the nanometer range.
| Evidence | Neusiedl am See |
|---|---|
| ISO 9001:2015 | |
| ISO 13485:2016 (medical devices) |
History
- 1985
Dr. Markus Bohrer became the first employee of the newly founded Institute for High-Power Laser Technology at TU Wien (Prof. Dieter Schuöcker).
- 1989
Start of a partnership with Stork Netherlands / Schablonentechnik Kufstein that continues to this day.
- ca. 1990
Six years as Head of R&D at Wild Austria (predecessor: Wild Heerbrugg, today Leica Geosystems).
- 2006
Founding of Dr. Bohrer Lasertec GmbH in Neusiedl am See through a management buy-out of the 'Wild Werkstätte für Feinmechanik und Optik'; start in an office container near the railway station.
- 2017
First issuance of the ISO 9001:2015 certification by Quality Austria (registration number 19062/0).
- 2022
First issuance of the ISO 13485:2016 certification for medical devices by Quality Austria (registration number 00398/0).
- 2024
Awarded the Innovation Prize Burgenland 2024.