Development and production of thermal printers and thermally conductive materials for the thermal management of electronics.
DREYER SYSTEM GmbH
65510 Idstein (Headquarters)New on Amplifa
About DREYER SYSTEM
DREYER SYSTEM GmbH, headquartered in Idstein, has been developing and producing solutions in the two business fields of printer solutions and thermal management for over 40 years. In the thermal printer sector, the company manufactures panel-mount printers, kiosk printers, recessed printers and matching control units with RS232 and USB interfaces, which are used, among other things, in parking ticket and deposit return machines, medical analysis devices, measurement and control technology, as well as banking and information terminals. In thermal management, the company offers thermally conductive materials such as graphite films (eGRAF HITHERM series), gap filler pads, LED cooling and high-performance heat sinks made of aluminium/graphite and copper/graphite. The value chain includes PCB layout, firmware development, mechanical design, production as well as service and support, complemented by services such as custom die-cut parts to DXF or drawing, contract manufacturing, laminations and the conversion of pads on rolls or sheets. The solutions are delivered worldwide to over 20 countries; customer industries include automotive, medical technology, aviation, mechanical engineering, motor racing and white goods. The company is certified to ISO 9001:2015 (TÜV SÜD).
- Site
- Idstein
- Processes
- Die-cut parts (custom, to DXF/drawing), Contract manufacturing, Laminations, Pads on roll / sheet (cutting/conversion), Production of high-performance heat sinks (aluminium/graphite, copper/graphite), Prototype and series production (heat sinks, prototype approx. 4-6 weeks), PCB layout, Firmware development
- Materials
- Graphite films (eGRAF HITHERM HT-1200/HT-2500 series), Graphite film HT-C3200 (Polymer Enhanced Graphite), Gap Filler Pads (soft thermal pads), Aluminium (for high-performance heat sinks), Copper (for high-performance heat sinks), Graphite (graphite fins, thermal conductivity up to 600 W/mK), eGRAF HITHERM graphite films (HT-1205, HT-1205A, HT-1210, HT-1210A, HT-1220), eGRAF HITHERM Polymer Enhanced Graphite (HT-2505, HT-2505A, HT-2510, HT-2510A)
- Certificates
- ISO 9001:2015, ISO 9001:2015 (TÜV SÜD), UL 94V-0 (material), RoHS compliant (material)
- Industries
- Automotive, Medical technology, Aviation, Mechanical engineering, Motor racing, White goods
- 01
PCB layout
- 02
Firmware development
- 03
Mechanical design
- 04
Production (die-cut parts, lamination, conversion, heat sink and
- 05
Service & support
Materials & Processes
eGRAF HITHERM graphite films (HT-1205, HT-1205A, HT-1210, HT-1210A, HT-1220)
Pure graphite as a thermal interface material with conductivity up to 10 W/mK (in-plane 150 W/mK), available single-sided adhesive, use up to 400 °C.
eGRAF HITHERM Polymer Enhanced Graphite (HT-2505, HT-2505A, HT-2510, HT-2510A)
Polymer-reinforced graphite film with thermal conductivity up to 16 W/mK for applications with high contact pressure and low thermal resistance.
Graphite film HT-C3200 (Polymer Enhanced Graphite)
Up to 70 % compressible interface material as an alternative to thermal pastes, e.g. for IGBT power modules, from -40 °C to +400 °C.
Gap Filler Pads (soft thermal pads)
Soft thermal pads for tolerance compensation, as standard pads for power LEDs as well as thermal interface material for Peltier modules.
Aluminium
Material for high-performance heat sinks in combination with graphite fins.
Copper
Material for high-performance heat sinks; graphite fins are approx. 75 % lighter than copper at up to 600 W/mK.
Graphite (graphite fins)
Thermal conductivity up to 600 W/mK, temperature range -40 °C to 400 °C, UL 94V-0 and RoHS compliant.
Locations
Idstein
DEHeadquarters with development and production
- Materials
- Graphite films, gap filler pads, aluminium, copper, graphite
Products & Components
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Die-cut parts (custom, to DXF/drawing)Forming | – | – | – | – | Graphite films, Thermally conductive films |
| Contract manufacturingJoining | – | – | – | – | – |
| LaminationsJoining | – | – | – | – | Graphite films, Plastics, Adhesives |
| Pads on roll / sheet (cutting/conversion)Forming | – | – | – | – | Gap filler pads, Graphite films |
| Production of high-performance heat sinks (aluminium/graphite, copper/graphite)Assembly | – | – | – | – | Aluminium, Copper, Graphite |
| Prototype and series production (heat sinks, prototype approx. 4-6 weeks)Assembly | – | – | – | – | Aluminium, Copper, Graphite |
| PCB layoutEngineering | – | – | – | – | – |
| Firmware developmentEngineering | – | – | – | – | – |
| Mechanical designEngineering | – | – | – | – | – |
| Thermal printer production (panel-mount printers, kiosk printers, recessed printers)Assembly | – | – | – | – | – |
| Production of control units (electronics)Assembly | – | – | – | – | – |
Additional services
Quality
DREYER SYSTEM GmbH is certified to ISO 9001:2015 by TÜV SÜD and supports customers from material selection through to series production.
| Evidence | Idstein |
|---|---|
| ISO 9001:2015 (TÜV SÜD) | |
| UL 94V-0 (material) | |
| RoHS compliant (material) |