Skip to content
NEW: CREATE AN AI-ASSISTED TENDER IN 2 MINUTES — TRY IT FREE
Back to search
Emitec – Fertigung

Provider of EMC, thermography, power measurement, EMF safety and fire early detection test & measurement technology from Rotkreuz.

Emitec Logo

Emitec Messtechnik AG

Rotkreuz (CH) · Birkenstrasse 47, 6343 RotkreuzNew on Amplifa

30 employeesTeam
AG, HR CHE-112.689.408Legal Form/Registration
over 30 yearsExperience in Test & Measurement Technology
over 20 yearsConsulting on Thermal Imaging Cameras

About Emitec Messtechnik AG

Emitec Messtechnik AG, based in Rotkreuz (CH), is a specialist company for test and measurement technology for industry, development and research. The portfolio covers EMC measurement technology from development-accompanying testing through to certification, power measurement and data acquisition with power analyzers and data loggers, thermography and thermal imaging cameras, field strength and RF measurement technology (EMF safety), avionics test equipment per DO-160, fire early detection systems with targeted extinguishing, and intelligent transport systems. Services include consulting, custom engineering solutions, installation, commissioning, training, and an in-house calibration and service laboratory with documented calibration within just a few days. The company employs around 30 staff and counts national and international corporations, federal enterprises and leading SMEs among its customers. Emitec points to over 30 years of experience in test and measurement technology as well as over 20 years of consulting on thermal imaging cameras.

Site
Rotkreuz
Processes
EMC testing (development-accompanying and standards-compliant EMC testing, burst/surge, ESD,, EMF Safety – measurement of electromagnetic fields (low/high frequency, human protection,, Thermography / thermal imaging technology (infrared measurement for industry, research, automation), Power measurement & data acquisition (power analyzers, data recorders, multimeters,, Avionics testing (avionics testing, MRO maintenance, certification per DO-160), Fire early detection & targeted extinguishing (intelligent early warning system, water mist, EFT/burst testing of conducted immunity (IEC 61000-4-4, capacitive coupling to signal, EMF simulation (calculation of low-frequency EM fields, EFC-400, frequency range 0 Hz – 300 GHz per
Materials
EMC Measurement Technology, EMF Safety, Thermography / Thermal Imaging Technology, Power Measurement & Data Acquisition, Avionics Test Technology, Fire Early Detection & Extinguishing, Intelligent Transport Systems
Certificates
Documented calibration in our own laboratory
Employees
30
  1. 01

    Consulting and concept

  2. 02

    Equipment selection and engineering

  3. 03

    Installation and commissioning

  4. 04

    Tests and training

  5. 05

    Calibration and service in our own laboratory

Measurement Technology & Processes

EMV

EMC Measurement Technology

Standards-compliant and development-accompanying EMC testing including burst, surge, ESD, immunity and emission.

EMF

EMF Safety

Measurement of electromagnetic fields for human protection, area monitoring and ICNIRP limit value verification.

THERMO

Thermography / Thermal Imaging Technology

Infrared measurement for research, construction, maintenance, automation and the electrical industry.

POWER

Power Measurement & Data Acquisition

Power analyzers, data recorders and multimeters for efficiency, standards compliance and energy efficiency.

AVIONICS

Avionics Test Technology

Testing, MRO maintenance and certification per DO-160 as an authorized Viavi partner.

FIRE

Fire Early Detection & Extinguishing

Intelligent early warning systems combined with water mist extinguishing turbines for critical facilities.

ITS

Intelligent Transport Systems

Traffic monitoring with thermal imaging and AI sensors as well as license plate recognition.

Sites

Standort Rotkreuz

Rotkreuz

CH

Headquarters with calibration and service laboratory

Materials
EMC, EMF, thermal imaging, power measurement
  • EM Test CCI capacitive coupling clamp (burst up to 7 kV, IEC 61000-4-4)
  • Narda EFC 400 EMF simulation platform
  • Calibrators Yokogawa 2560A/2558A/2553A

Measurement & Test Systems

FLIR Thermal Imaging Camera
FLIR Thermal Imaging CameraThermography · Industry and Research
FLIR T5xx Series Thermal Imaging Camera
FLIR T5xx Series Thermal Imaging CameraInfrared measurement · Research and Development
Yokogawa WT1800 Power Analyzer
Yokogawa WT1800 Power AnalyzerPower measurement · Test bench and Development
Narda EMF Measurement
Narda EMF MeasurementEMF Safety · Human Protection
Avionics Test System
Avionics Test SystemAvionics Testing · Aviation (DO-160)
PYROsmart pro Fire Early Detection
PYROsmart pro Fire Early DetectionEarly warning system · Waste Disposal and Recycling

Inside the production

EMC Seminars with AMETEK / EM Test
EMC Seminars with AMETEK / EM Test
Customer CERN
Customer CERN
Customer PSI
Customer PSI
Customer ABB
Customer ABB
Customer ETH
Customer ETH
Customer Pilatus
Customer Pilatus
Customer SBB
Customer SBB
Customer Roche
Customer Roche

Processes & technical limits

ProcessesToleranceMax. partWeightLot sizeMaterials
EMC testing (development-accompanying and standards-compliant EMC testing, burst/surge, ESD,Testing–––––
EMF Safety – measurement of electromagnetic fields (low/high frequency, human protection,Testing–––––
Thermography / thermal imaging technology (infrared measurement for industry, research, automation)Testing–––––
Power measurement & data acquisition (power analyzers, data recorders, multimeters,Testing–––––
Avionics testing (avionics testing, MRO maintenance, certification per DO-160)Testing–––––
Fire early detection & targeted extinguishing (intelligent early warning system, water mistTesting–––––
EFT/burst testing of conducted immunity (IEC 61000-4-4, capacitive coupling to signalTesting–––––
EMF simulation (calculation of low-frequency EM fields, EFC-400, frequency range 0 Hz – 300 GHz perEngineering–––––
Calibration and maintenance of measurement devices (own calibration and service laboratory,Testing–––––
Intelligent transport systems (traffic monitoring, license plate recognition, tunnel monitoring)Testing–––––
Custom engineering solutions (measurement and test solutions, integrationEngineering–––––

24 Anlagen & Maschinen

MachineManufacturer / modelQuantityWorking areaYear builtSite
Capacitive coupling clamp for burst testingEM Test CCI–active coupling length 1 m, coupling plate 140 mm x 1000 mm, burst up to 7 kV, cables up to 40 mm Ø–Rotkreuz
Water mist extinguishing turbineEmiControls FT40–flow rate >6,000 l/min at 16 bar, swivel range 360°, rotation speed 0.5–2 rpm, max. 12.5–Rotkreuz
Power analyzerYokogawa WT5000–±0.03 % power accuracy, up to 10 MS/s, bandwidth up to 5 MHz, multi-channel––
Power analyzerYokogawa WT1800R–±0.05 % power accuracy, 2 MS/s (16 bit), up to 6 channels––
Power analyzerYokogawa WT1800E–±0.05 % power accuracy, 2 MS/s (16 bit), bandwidth up to 5 MHz, 1–6 channels––
Power analyzerYokogawa WT1500–high-voltage measurement up to 2000 V DC, scalable multi-channel system––
Power analyzerYokogawa WT500 Mid-Range–measurements up to 1000 V and 40 A, basic accuracy 0.1 %––
Digital Power AnalyzerYokogawa WT300E–current measurement from 50 µA, accuracy up to 0.1 %, bandwidth DC to 100 kHz––
EMF simulation and analysis platformNarda EFC 400–frequency range DC – mmWave (model-dependent up to >100 GHz), 3D field simulation–Rotkreuz
Frequency-selective EMF monitoring systemNarda AMS-8061–100 kHz – 6 GHz, 3-axis isotropic antenna, up to 20 frequency bands, solar power supply––
Broadband EMF monitoring systemNarda AMB-8059–long-term measurements, autonomous operation up to 80 days––
Channel Power MonitorBird Channel Power Monitor–monitoring of up to 16 radio channels simultaneously––
Atomic frequency referenceQuartzlock Rubidium–for aviation and telecom––
GPS-based time and frequency referenceQuartzlock GPS–desktop up to 1U rack––
DC calibratorYokogawa 2560A–DC voltage up to ±1224 V, DC current up to 36.72 A (73.44 A parallel), ±50 ppm (V)––
Precision calibratorYokogawa 2558A–DC voltage up to 30 V, DC current up to 200 mA––
Calibrator for voltage/current metersYokogawa 2553A–DC voltage ±10 mV to 32 V, DC current ±1 mA to 120 mA––
Digital multimeterYokogawa MY600–insulation measurement up to 4000 MΩ––
Digital precision manometerYokogawa MT300–0.01 % measurement accuracy, resonant sensor technology––
Multifunction process calibratorYokogawa CA500–up to 0.015 % (current), 0.020 % (resistance), 0.3 °C (RTD)––
Explosives trace detectorFLIR Fido X2 / Fido X4–10-second analysis––
Professional drone (multicopter)DJI Matrice 350 RTK–max payload 2.7 kg, IP55, -20 °C to +50 °C––
Commercial droneDJI Mavic 3 Enterprise Series––––
Traffic monitoring cameras/sensors (thermal imaging, AI, ANPR)FLIR / Macq TrafiCam 3, TrafiSens AI, TrafiCam AI, TrafiOne, TrafiBot Dual AI, TrafiBot 3,––––

Additional services

EMC measurement technologyPower measurementMeasurement data acquisitionThermography/thermal imaging technologyField strength & RF measurement technology (EMF safety)Avionics test technologyFire early detectionIntelligent transport systemsOwn calibration and service laboratoryCustom measurement and test solutionsTraining (Academy)Consulting, installation, tests and commissioning

Reference customers

National and international corporationsFederal enterprisesLeading SMEs

Quality & Calibration

Emitec operates its own calibration and service laboratory in Rotkreuz with documented calibration and maintenance within just a few days of turnaround time, ensuring measurement values remain reliable.

EvidenceRotkreuz
Documented calibration in our own laboratory

History

  1. Built up over 30 years of experience in test and measurement technology

  2. Over 20 years of consulting on thermal imaging cameras

Personalised demo

Ready to see Amplifa Marketplace in action?

From a structured request to the right manufacturing partner: AI-assisted matching, verified suppliers and transparent metrics — in one place for industrial companies across the DACH region.

Request a demo