Manufacturer of fibre concrete and plastic spacers, building waterproofing, formwork and injection technology
Frank Breul Spezialartikel für den Bau GmbH & Co. KG
36151 Burghaun-RothenkirchenNew on Amplifa
About eFBe Spezialartikel für den Bau
Frank Breul Spezialartikel für den Bau GmbH & Co. KG is a specialised production company in the construction supply industry based in Burghaun-Rothenkirchen. Since 1985 the company has manufactured spacers made of fibre concrete and cast concrete, and since 2001 plastic spacers, end caps and architectural concrete cones, formwork sleeves made of glass-fibre reinforced plastic, slab edge formwork and products for building waterproofing such as swelling joint tapes, masonry kerbs and wall penetrations. The product range is complemented by injection technology: steel drill packers with cone-head nipple and EPDM clamping rubber for surface and crack injection of polyurethane and epoxy resins. In-house product developments such as the DYNA-Quell bentonite swelling band and individual custom solutions are part of the portfolio. Research, development, production, packaging and sales are closely interlinked at the site. Using the Concrete GREEN mixing process, since 2018 fibre cement has been produced using renewable energy with approx. 30 % reduced cement usage; the products are shipped worldwide.
- Site
- Burghaun-Rothenkirchen
- Processes
- Production of fibre concrete spacers, Production of cast concrete spacers, Production of plastic spacers, Production of building waterproofing products (e.g. swelling joint tape, masonry kerb), Production of architectural concrete cones / end caps, Production of stripping/formwork technology (FBA slab edge formwork L-shape, FBA-Bords, formwork, Production of injection technology (drill packers with cone-head nipple and clamping rubber), Production of drill packers for surface and crack injection of polyurethane and epoxy resins
- Materials
- Fibre concrete, Cast concrete, Plastic, glass-fibre reinforced plastic, Bentonite, TPE-S (water-stopping flange), EPDM (clamping rubber), W4 stainless steel (clamping bands)
- Certificates
- ISO 9001
- Founded
- 1985
- Industries
- Construction supply industry, Construction
- 01
Product development
- 02
Concrete preparation / mixing technology (Concrete GREEN)
- 03
Fibre concrete and plastics production
- 04
Packaging
- 05
Sales
Materials & Processes
Fibre concrete
Spacers with the same coefficient of expansion as concrete, high compressive strength and suitability for water-impermeable concrete.
Cast concrete
Material for cast concrete spacers.
Plastic
Spacers, end caps and architectural concrete cones.
Glass-fibre reinforced plastic
Corrosion-free formwork sleeves and formwork stops for tendons.
Bentonite
Swelling material in the DYNA-Quell swelling joint tape for sealing construction joints.
TPE-S
Water-stopping flange in the masonry kerb.
EPDM (clamping rubber)
Clamping rubber of the steel drill packers for surface and crack injection.
W4 stainless steel
Clamping bands on the BMK masonry kerb.
Steel
Drill packers, wire inserts and steel hooks in spacers.
Polyurethane and epoxy resin
Injection resins for use with eFBe drill packers.
Sites
Burghaun-Rothenkirchen
DEHeadquarters: research, development, production, packaging, sales
- Materials
- Fibre concrete, cast concrete, plastic, GFK, steel, bentonite
- Concrete GREEN mixing technology
- Solar dryer
- Photovoltaic system
Components & Products
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Production of fibre concrete spacersCasting | – | – | – | – | Fibre concrete, Steel (wire/hook inserts) |
| Production of cast concrete spacersCasting | – | – | – | – | Cast concrete |
| Production of plastic spacersPlastics | – | – | – | – | Plastic |
| Production of building waterproofing products (e.g. swelling joint tape, masonry kerb)Plastics | – | 50 cm (BMK pre-assembled) | – | – | Bentonite, TPE-S, EPDM, Steel (W4 stainless steel clamping bands) |
| Production of architectural concrete cones / end capsPlastics | – | – | – | – | Plastic |
| Production of stripping/formwork technology (FBA slab edge formwork L-shape, FBA-Bords, formworkPlastics | – | – | – | – | glass-fibre reinforced plastic |
| Production of injection technology (drill packers with cone-head nipple and clamping rubber)Assembly | – | – | – | – | Steel, EPDM (clamping rubber) |
| Production of drill packers for surface and crack injection of polyurethane and epoxy resinsAssembly | – | – | – | – | Steel, EPDM |
| In-house product development (e.g. DYNA-Quell bentonite swelling band)Engineering | – | – | – | – | Bentonite |
| Concrete GREEN – mixing process for concrete production using renewable energy (reduced CO2Casting | – | – | – | – | – |
| Research, development, production, packaging and salesAssembly | – | – | – | – | – |
3 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Mixing technology/mixing process for concrete (Concrete GREEN) | – | – | – | 2018 (Entw | Burghaun-Rothenkirchen |
| Solar dryer | – | – | – | – | Burghaun-Rothenkirchen |
| Photovoltaic system | – | – | – | – | Burghaun-Rothenkirchen |
Additional services
Quality
According to the company's own statements, it places value on tested quality; for the DYNA-Quell swelling joint tape, tested quality for alternating water zones and drinking water suitability is certified as the producer. The long-standing personnel structure with intensive communication at all levels forms the basis for product quality.
| Evidence | Burghaun-Rothenkirchen |
|---|---|
| ISO 9001 |
Company History
- 1985
Foundation and start of production of spacers
- 1988
Start of production of fibre concrete parts
- 1992
New building: Plant II in Rothenkirchen
- 2000
Start of production of parts for the building waterproofing segment
- 2001
Production extended to plastic spacers
- 2010
Stripping/formwork technology
- 2018
Development of Concrete GREEN: mixing process with approx. 30 % reduced cement usage and approx. 250 t CO2 savings per year, funded by PIUS funding and EFRE