Manufacture of technically high-quality rubber molded parts and diaphragms to customer specification
Gottlob Dietz GmbH
Neuenstadt · PfedelbachNew on Amplifa
Company
Gottlob Dietz GmbH is a mid-sized company with around 100 employees that has been manufacturing technically high-quality rubber molded parts with a focus on diaphragms since 1976. The product portfolio includes shutoff diaphragms, metering and pump diaphragms as well as rubber molded parts – as pure rubber diaphragms, with fabric reinforcement made of polyester, polyamide or Nomex, with PTFE/TFM lamination, and as rubber-metal and rubber-plastic composite parts. Production is carried out on hydraulic presses and injection molding machines in sizes up to 300 x 300 mm; calender rolls, die cutting and strip cutters round out the machine park. Lot sizes range from approx. 1 piece to 10,000 pieces, from pre-series to large-scale series. All common elastomers with KTW, FDA and W270 conformity are processed, as well as special elastomers and custom compounds. Customers come primarily from the valve and pump industry, the drinking water sector, and the food and pharmaceutical industries. All manufacturing takes place in Germany at the Neuenstadt and Pfedelbach sites. Since 1990, the company has accepted waste for recycling and reprocesses raw material residues.
- Site
- Neuenstadt
- Processes
- Manufacture of rubber molded parts (compression molding on hydraulic presses), Injection molding of elastomers, Manufacture of diaphragms with fabric reinforcement, PTFE/TFM lamination of elastomer parts, Rubber-metal bonds (composite manufacturing), Rubber-plastic bonds (composite manufacturing), Calendering of elastomer material, Die cutting
- Materials
- NR (natural rubber), EPDM, NBR (Perbunan), HNBR (Therban), FPM (Viton), CR (Neoprene), VMQ (silicone), FVMQ (fluorosilicone)
- Certificates
- ISO 9001:2015, ISO 9001:2015 (DEKRA, valid until 30.09.2029)
- Founded
- 1976
- Employees
- ca. 100
- Industries
- Valve and pump industry, Drinking water (KTW, W270), Food/Pharma (FDA, USP class VI), Valve and pump industry (shutoff and metering diaphragms)
- 01
Development and drawing creation
- 02
Preparation of raw materials
- 03
Pressing (hydraulic presses) or injection molding
- 04
Fabric reinforcement, PTFE/TFM lamination, composite manufacturing
- 05
Die cutting, cutting
- 06
Continuous quality control
- 07
Sales
Sites
Neuenstadt
DEHeadquarters, development, manufacturing and sales of elastomer parts
- Part weight / size
- Components up to 300 x 300 mm
- Lot size
- approx. 1 to 10,000 pieces
- Materials
- NR, EPDM, NBR, HNBR, FPM, CR, VMQ, FVMQ, FFKM, TPE, PTFE/TFM, composite parts
- Hydraulic presses
- Injection molding machines
- Calender rolls
- Die cutting
- Strip cutters
Pfedelbach
DEManufacturing and sales of elastomer parts
- Part weight / size
- Components up to 300 x 300 mm
- Materials
- Rubber molded parts and diaphragms
- Hydraulic presses
- Injection molding machines
Components
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Manufacture of rubber molded parts (compression molding on hydraulic presses)Plastics | – | 300 mm × 300 mm | – | 1 piece – 10,000 pieces | NR, EPDM, NBR, HNBR, FPM, CR, VMQ, FVMQ, FFKM, TPE |
| Injection molding of elastomersPlastics | – | 300 mm × 300 mm | – | – | NR, EPDM, NBR, HNBR, FPM, CR, VMQ, FVMQ, FFKM, TPE |
| Manufacture of diaphragms with fabric reinforcementPlastics | – | – | – | – | Rubber with fabric reinforcement made of polyester, |
| PTFE/TFM lamination of elastomer partsSurface | – | – | – | – | PTFE, TFM, Rubber |
| Rubber-metal bonds (composite manufacturing)Plastics | – | – | – | – | Rubber, Stainless steel, Brass, Aluminum |
| Rubber-plastic bonds (composite manufacturing)Plastics | – | – | – | – | Rubber, heat-resistant plastics |
| Calendering of elastomer materialPlastics | – | – | – | – | Rubber |
| Die cuttingPlastics | – | – | – | – | Rubber |
| Cutting with strip cutterPlastics | – | – | – | – | Rubber |
| Preparation of raw materials (reprocessing of raw material residues)Plastics | – | – | – | – | Rubber |
| Development and drawing creation for elastomer partsEngineering | – | – | – | – | – |
| Continuous quality control throughout the entire manufacturing processTesting | – | – | – | – | – |
5 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Hydraulic press | – | – | Molded parts up to 300x300 mm | – | Neuenstadt / Pfedelbach |
| Injection molding machine | – | – | Molded parts up to 300x300 mm | – | Neuenstadt / Pfedelbach |
| Calender roll | – | – | – | – | Neuenstadt / Pfedelbach |
| Die cutting press | – | – | – | – | Neuenstadt / Pfedelbach |
| Strip cutter | – | – | – | – | Neuenstadt / Pfedelbach |
Additional services
Quality
The products undergo continuous quality control throughout the entire manufacturing process. Since 1996, the company has been certified to DIN ISO 9001, currently to ISO 9001:2015 by DEKRA Certification GmbH.
| Evidence | Neuenstadt | Pfedelbach |
|---|---|---|
| ISO 9001:2015 (DEKRA, valid until 30.09.2029) |
History
- 1976
Founded by Gottlob Dietz; manufacturing of high-quality rubber molded parts with a focus on diaphragms.
- 1990
Start of waste recycling and reprocessing of raw material residues.
- 1996
First certification to DIN ISO 9001.