High-pressure technology, waterjet cutting system service and spare parts from Kallham, Austria
Hapro Technik Ges.m.b.H.
4720 Kallham (AT) · Head officeNew on Amplifa
About Hapro Technik
Hapro Technik Ges.m.b.H., based at Parzleithen 8, A-4720 Kallham (Upper Austria), specialises in high-pressure technology for waterjet cutting. The company offers spare parts and wear parts such as water nozzles, mixing chambers, focusing tubes, cutting heads, valves and high-pressure pipework, abrasive material (garnet), water treatment and recycling systems as well as its own high-pressure pumps, including the HT Servo-Jet4000 with direct servo drive and an overall efficiency of almost 98%. In addition, maintenance, repair, emergency service, consulting and optimisation of waterjet cutting systems from all renowned manufacturers at home and abroad are offered. The HT Power and HT Expert injector system technologies increase cutting speed and system availability. Industries served include metal processing, the stone and glass industry, aerospace, the automotive industry and defence technology. Operating pressures range from 1000 to 4000 bar at jet velocities of up to 900 m/s.
- Site
- A-4720 Kallham
- Processes
- Waterjet cutting (pure waterjet cutting), Abrasive waterjet cutting (injector cutting of hard materials), Waterjet cutting at pressures from 1000 to 4000 bar at 900 m/s, Injector cutting with the HT Expert injector system (water and abrasive throughput, separately, HT Power cutting technology – double cutting speed in injection and, Maintenance and repair of waterjet cutting systems (maintenance service, emergency service,, Consulting and analysis/optimisation of waterjet cutting systems (energy and, Water treatment and recycling for waterjet cutting systems (HTRS water recycling for
- Materials
- Steel, Aluminium, Glass, Ceramics, Laminates, Composites, Plastics, Films
- Industries
- Metal processing, Stone and glass industry, Aerospace, Automotive industry, Defence industry, Industry, workshop and production
- 01
Consulting and analysis
- 02
Technology development (HT Power, HT Expert, HT Plus)
- 03
Spare parts and wear parts supply from stock
- 04
Water treatment and recycling
- 05
Maintenance and repair
- 06
Service readiness and support
Materials & Cutting Materials
Waterjet cutting
Pure waterjet cutting for soft materials such as plastics, films, foams and paper.
Abrasive waterjet cutting
Injector cutting with garnet for hard materials such as steel, aluminium, glass, ceramics, laminates and composites.
Garnet (cutting medium)
Abrasive material in 80 and 120 mesh for edge quality and cutting precision in abrasive cutting.
HT Power cutting technology
Doubles the cutting speed in injection and waterjet cutting without 6000 bar technology.
HT Expert injector system
Manufacturer-independent injector system with high water and abrasive throughput and short setup times.
HT Plus water treatment/recycling
Water recycling systems (HTRS/HTPRS) for extending service life and conserving resources.
HT Servo-Jet4000 high-pressure pump
3-piston plunger pump with direct servo drive, without hydraulics, overall efficiency of almost 98 %.
Sites
Kallham
ATHead office, spare parts supply, service and technology
- Materials
- Steel, aluminium, glass, ceramics, laminates, composites, plastics
- HT Servo-Jet4000 high-pressure pump
- HT Expert injector system
- HTRS/HTPRS water recycling
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Waterjet cutting (pure waterjet cutting)Cutting/Severing | – | – | – | – | Plastics, Films, Foams, Paper |
| Abrasive waterjet cutting (injector cutting of hard materials)Cutting/Severing | – | – | – | – | Steel, Aluminium, Glass, Ceramics, Laminates, Composites |
| Waterjet cutting at pressures from 1000 to 4000 bar at 900 m/sCutting/Severing | – | – | – | – | – |
| Injector cutting with the HT Expert injector system (water and abrasive throughput, separatelyCutting/Severing | – | – | – | – | Steel, Aluminium, Glass, Ceramics, Laminates, Composites |
| HT Power cutting technology – double cutting speed in injection andCutting/Severing | – | – | – | – | – |
| Maintenance and repair of waterjet cutting systems (maintenance service, emergency service,Assembly | – | – | – | – | – |
| Consulting and analysis/optimisation of waterjet cutting systems (energy andEngineering | – | – | – | – | – |
| Water treatment and recycling for waterjet cutting systems (HTRS water recycling forEngineering | – | – | – | – | – |
| Supply of spare parts and wear parts for waterjet cutting systems (nozzles, valves,Assembly | – | – | – | – | – |
12 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| High-pressure pump (3-piston plunger pump with direct servo drive) | Hapro Technik HT Servo-Jet4000 | – | Operating pressures range 1000–4000 bar; overall efficiency almost 98 % | – | Kallham, AT |
| High-pressure pump / intensifier pump | BFT ECOTRON | – | – | – | – |
| High-pressure pump / intensifier pump | BFT ECOTRON 38 Serie | – | – | – | – |
| High-pressure pump / intensifier pump | BFT HYTRON | – | – | – | – |
| High-pressure pump / intensifier pump | BFT HYPERTRON | – | – | – | – |
| High-pressure pump / intensifier pump | BFT SERVOTRON | – | – | – | – |
| High-pressure pump / intensifier pump | BFT DU Semperdur | – | – | – | – |
| High-pressure pump / intensifier pump | BFT DU Semperdur XL | – | – | – | – |
| High-pressure pump / intensifier pump | BFT DU Servotron Serie | – | – | – | – |
| High-pressure pump / intensifier pump | BFT Dynatronic (Trumpf Kompakt) | – | – | – | – |
| High-pressure pump | Hammelmann Servo-Jet4000 (SJ4000 / SJ4000Pure) | – | – | – | – |
| Waterjet cutting systems (used machinery trade, currently none available) | – | 0 | – | – | – |
Additional services