Development and manufacture of custom electronic modules, assemblies and devices for signal transmission and display technology
Heiland Electronic GmbH & Co. KG
WarendorfNew on Amplifa
About Heiland Electronic
Heiland Electronic GmbH & Co. KG was founded in 1984 as an engineering office for applied microelectronics and specializes in the development and optimization of modules and assemblies for wire-saving multiplex and wireless radio signal transmission technology. The company offers full service from concept to realization: hardware and software design, EMC-compliant PCB design conventional and SMD, microcontroller programming, and production of small to medium series including PCB assembly, cable assembly, enclosure design, final assembly and packaging. Materials include PCBs, polycarbonate for enclosures and stainless steel for vandal-proof versions. In the in-house EMC laboratory, EMC measurements and precompliance tests are performed in parallel with development according to EC standards such as EN 55022 and EN 61000-4-x. All products are 100 % tested before delivery (zero-defect); customers include renowned manufacturers at home and abroad, among others from building technology, security technology, gastronomy, logistics and TV studios. Since 01.06.2018 the company has been headquartered in Warendorf.
- Site
- Warendorf
- Processes
- PCB design conventional and SMD incl. EMC, Production of small to medium series: PCB assembly conventional and SMD, Cable assembly, Enclosure design, machining and assembly, Final assembly and testing, 100 % inspection (zero-defect), packaging, Development of custom electronic modules and assemblies, feasibility studies, prototype construction, Custom electronics development (hardware and software design), Microcontroller programming (8051, Atmel AVR, ARM7TDMI, Parallax Propeller)
- Materials
- Polycarbonate, Stainless steel (vandal-proof LED signal light SL-4), Printed circuit boards (PCB), Stainless steel, EMC testing (precompliance)
- Certificates
- 100 % final inspection (zero-defect), EMC measurements / precompliance according to EC standards
- Founded
- 1984
- Industries
- Building technology, Security technology, Gastronomy and hospitality, Healthcare/hospitals, Retail, Logistics
- 01
Development (hardware and software design, requirements specification)
- 02
PCB design incl. EMC
- 03
Prototype construction
- 04
- 05
EMC measurements/testing
- 06
Final assembly, packaging and labeling
Materials and Processes
Printed circuit boards (PCB)
Conventional and SMD PCB design incl. EMC as well as assembly in small to medium series.
Polycarbonate
Used for easily machined handheld enclosures such as the two-part professional enclosure.
Stainless steel
Material of the vandal-proof LED signal light SL-4, e.g. for correctional facilities.
EMC testing (precompliance)
In-house measurements according to EN 55022 and EN 61000-4-2/-3/-4/-5 already during development on the first prototype.
Locations
Warendorf
DEHeadquarters with development, production, test field and EMC laboratory
- Lot size
- Small to medium series
- Materials
- Printed circuit boards (PCB), polycarbonate, stainless steel
- G-Strip cell (EUT size per side max. 0.75 m)
- Spectrum analyzer up to 8 GHz
- RF signal generator up to 1 GHz
- RF power amplifier with broadband antenna 30–1000 MHz, up to 20 V/m
- ESD gun up to ±16 kV
- Burst generator up to ±4.4 kV
- Surge generator up to 3.3 kA @ ±6.6 kV
Products and Components
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| PCB design conventional and SMD incl. EMCEngineering | – | – | – | – | Printed circuit boards (PCB) |
| Engineering | – | – | – | – | – |
| Production of small to medium series: PCB assembly conventional and SMDAssembly | – | – | – | Small series – Medium series | Printed circuit boards (PCB) |
| Cable assemblyAssembly | – | – | – | – | Cables/wires |
| Enclosure design, machining and assemblyAssembly | – | – | – | – | Polycarbonate |
| Final assembly and testing, 100 % inspection (zero-defect), packagingTesting | – | – | – | – | – |
| Testing | – | – | – | – | – |
| Development of custom electronic modules and assemblies, feasibility studies, prototype constructionEngineering | – | – | – | – | – |
7 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| G-Strip cell (EMC testing) | – | 1 | EUT size per side max. 0.75 m | – | Warendorf |
| Spectrum analyzer | – | – | up to 8 GHz | – | Warendorf |
| RF signal generator | – | – | up to 1 GHz | – | Warendorf |
| RF power amplifier with broadband antenna | – | – | 30-1000 MHz, up to 20 V/m | – | Warendorf |
| ESD gun | – | – | up to +/-16 kV | – | Warendorf |
| Burst generator | – | – | up to +/-4.4 kV | – | Warendorf |
| Surge generator | – | – | up to 3.3 kA @ +/-6.6 kV | – | Warendorf |
Additional services
Reference customers
Quality and Testing
All products are 100 % tested before delivery (zero-defect). In the in-house EMC laboratory, precompliance measurements and EMC tests are performed according to EC standards such as EN 55022 and EN 61000-4-2/-3/-4/-5.
| Evidence | Warendorf |
|---|---|
| 100 % final inspection (zero-defect) | |
| EMC measurements / precompliance according to EC standards |
History
- 1984
Founded as an engineering office for applied microelectronics
- 1989
Development of remote-controlled price displays for Minol petrol stations
- 1990
Development of a telescope control system (2-wire signal transmission) for WDR studios in Düsseldorf
- 2000
Development of the e-Galeria presentation system
- 2005
Nomination/award Anuga Taste05
- 2010
Nomination Intergastra 2010
- 2018
Relocation of the company from Eversinkel to Warendorf, Am Hartsteinwerk 4 (since 01.06.2018)