Custom-built exhibition stand construction, shop fitting and interior fitting with in-house CNC production, painting and assembly from Springe
Holz und Technic Innenausbau-Messebau GmbH
31832 Springe (Philipp-Reis-Straße 40)New on Amplifa
About Holz und Technic
Holz- und Technic Innenausbau-Messebau GmbH has been manufacturing at its site in Springe near Hanover since 1989 – around 30 kilometres from the Hannover Messe. Its service portfolio covers exhibition stand construction from design through manufacturing to set-up and dismantling, store fittings for monobrand stores and retail concepts, as well as interior fitting, furniture making, manufactory kitchens and built-in furniture for commercial and private clients. Everything is produced entirely in its own workshop: CNC machining, edge banding, painting and final assembly are all carried out under one roof. The materials used include solid wood, veneer and mineral materials. Planning services include 3D laser measurement, VR walkthroughs, lighting design and room acoustics. Assembly is carried out nationwide across Germany and throughout Europe via long-standing permanent assembly partners; the company also acts as a production and execution partner for agencies, general contractors, architects and planners.
- Site
- Springe
- Processes
- Exhibition stand construction (design, manufacturing, set-up and dismantling), Shop fitting (store fittings, material selection through to assembly), Interior fitting & furniture making (custom-made), CNC machining (wood), Edge banding, Painting, Final assembly, Manufactory kitchens (custom-made)
- Materials
- Solid wood, Veneer, Mineral material
- Certificates
- ISO 9001
- Founded
- 1989
- Industries
- Exhibition stand construction, Retail / shop fitting, Offices, practices, law firms, Boutique hotels, Agencies and general contractors, Architects and planners
- 01
Consultation and initial meeting
- 02
Design and planning (3D laser measurement, VR walkthrough, lighting design)
- 03
CNC machining
- 04
Edge banding
- 05
Painting
- 06
Final assembly in the workshop
- 07
On-site assembly by permanent assembly partners
Materials & Processes
Solid wood
Used for furniture, built-in furniture and interior fitting with demands on quality and feel.
Veneer
Surface material for custom-made furniture and interior fitting.
Mineral material
Material for kitchens, worktops and high-quality surfaces in interior fitting.
Locations
Springe
DEProduction site: workshop and administration
- Lot size
- Single-unit production and projects (lot size from 1)
- Materials
- Solid wood, veneer, mineral material
- CNC machining centre (woodworking)
- Edge banding line
- Paint shop
- Final assembly area
Services & Components
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Exhibition stand construction (design, manufacturing, set-up and dismantling)Assembly | – | – | – | – | – |
| Shop fitting (store fittings, material selection through to assembly)Assembly | – | – | – | – | – |
| Interior fitting & furniture making (custom-made)Assembly | – | – | – | – | Solid wood, Veneer, Mineral material |
| CNC machining (wood)Machining | – | – | – | – | Solid wood, Veneer, Mineral material |
| Edge bandingSurface | – | – | – | – | Solid wood, Veneer |
| PaintingSurface | – | – | – | – | Solid wood, Veneer, Mineral material |
| Final assemblyAssembly | – | – | – | – | – |
| Manufactory kitchens (custom-made)Assembly | – | – | – | 1 | Solid wood, Veneer, Mineral material |
| Built-in furniture / built-in cupboards (made to measure)Assembly | – | – | – | 1 | Solid wood, Veneer, Mineral material |
| Production partner for agencies & general contractors (contract manufacturing)Assembly | – | – | – | – | – |
| 3D laser measurement / surveyingInspection | – | – | – | – | – |
| Room acoustics & lighting designEngineering | – | – | – | – | – |
1 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| CNC machining centre (woodworking) | – | – | – | – | Springe |
Additional services
Quality
Production takes place entirely in the company's own workshop in Springe, meaning all process steps from CNC machining to final assembly remain under its own control. Assembly partners in Germany and Europe have been working permanently with the company for years and follow the same quality standards.
| Evidence | Springe |
|---|---|
| ISO 9001 |
History
- 1989
Founding and start of in-house production; more than 35 years of experience in exhibition stand construction, shop fitting and interior fitting