Skip to content
NEW: CREATE AN AI-ASSISTED TENDER IN 2 MINUTES — TRY IT FREE
Back to search
Ingenazure – Fertigung

Fabless design house for analog and mixed-signal ASICs, IP development and IC production up to high voltage

Ingenazure Logo

Ingenazure LLC

New on Amplifa

2014Founded

About Ingenazure

Ingenazure LLC is an independent fabless design house for analog, mixed-signal and high-voltage ICs with a focus on power management, audio, data converters and PLL engineering. The company develops ASIC IP, provides analog, digital and mixed-signal IC design including layout, and supports customers from wafer foundry, packaging and test through to series production. Technical focus areas include BCD high-voltage design from 12V to 100V, DC/DC converters (buck, boost, flyback), Class-D audio, LDOs, oscillators, PLL/DLL, amplifiers, data converters, and analog modeling in Verilog-A and AMS. Founded in 2014, Ingenazure primarily serves smaller customers with custom IP needs and works with partners to bring designs into cost-effective mass production. Target markets are consumer, industrial and automotive applications; customers are served worldwide.

Processes
System definition and design, IP development, Analog, digital and mixed signal IC design and layout, IC wafer foundry, packaging and test development, IC production, Software development, Analog IP: bandgap references (high voltage, low voltage, curvature corrected, high PSR,, LDO regulators (external cap and capless)
Materials
BCD process (high voltage, 12V-100V), BCD process (high voltage, 12V–100V), Silicon (semiconductor wafer)
Founded
2014
Industries
Consumer, Industrial, Automotive
  1. 01

    System definition and design

  2. 02

    IP development

  3. 03

    IC design and layout (analog, digital, mixed-signal)

  4. 04

    Wafer foundry, packaging and test development

  5. 05

    IC production

  6. 06

    Software and application development

Processes & Technologies

BCD

BCD process (high voltage, 12V–100V)

High-voltage process for Class-D power amplifiers, DC/DC solutions up to 100V and motor control.

SIL

Silicon (semiconductor wafer)

Base material of the ASICs and ICs manufactured via partner foundries.

Services & Assemblies

PCB printed circuit board
PCB printed circuit boardIC/ASIC development · Electronics
Signal waveform (measurement result)
Signal waveform (measurement result)Circuit simulation/test · Electronics

Inside the production

Waveform from circuit analysis
Waveform from circuit analysis

Industries

ConsumerIndustrialAutomotive

Processes & technical limits

ProcessesToleranceMax. partWeightLot sizeMaterials
System definition and designEngineering–––––
IP developmentEngineering–––––
Analog, digital and mixed signal IC design and layoutEngineering–––––
IC wafer foundry, packaging and test developmentEngineering––––Silicon (semiconductor wafer)
IC productionEngineering–––––
Software developmentEngineering–––––
Analog IP: bandgap references (high voltage, low voltage, curvature corrected, high PSR,Engineering–––––
LDO regulators (external cap and capless)Engineering–––––
DC/DC converters: buck, boost, flyback, buck/boost; voltage mode, current mode; up to 100V, singleEngineering–––––
Oscillators: XTAL, relaxation, ring, low phase noiseEngineering–––––
PLL/DLL designEngineering–––––
Amplifiers: opamps, OTAs, low noise, offset compensated, instrumentationEngineering–––––
Data converters: flash, successive approximation, NyquistEngineering–––––
Class D audio (analog and all-digital, H-bridge power amplifiers)Engineering–––––
Analog modeling: Verilog-A and AMSEngineering–––––
High voltage BCD design (12V to 100V)Engineering–––––
Motor controlEngineering–––––
Voltage regulation: linear and switched (DCDC, charge pump)Engineering–––––
FPGA developmentEngineering–––––
RF designEngineering–––––
Production test: verification of every chip with its own test program, CpK/statistical testingTesting–––––
Environmental testing: ESD, latch-up, HTOL/LTOL, temperature cycling, preconditioning, HAST/THB,Testing–––––

Additional services

System definition and designIP developmentAnalog, digital and mixed signal IC design and layoutIC wafer foundry, packaging and test developmentSoftware developmentIC productionApplication developmentIP licensingCustom IPBandgap referencesLDO designDC/DC design (buck, boost, flyback, buck/boost)Oscillators (XTAL, relaxation, ring)PLL/DLL designAmplifier/OTA designData converters (flash, SAR)Class-D audio (analog and all-digital)Analog modeling (Verilog-A, AMS)TroubleshootingHigh-voltage design (BCD 12V–100V)H-bridge power amplifiersMotor controlVoltage regulation (linear and switched, charge pump)Environmental testing (ESD, latch-up, HTOL/LTOL, temperature cycling, HAST/THB, autoclave, thermalStatistical testing (CpK)

History

  1. 2014

    Founding of Ingenazure LLC; focus on smaller customers with custom IP needs; founders with over 20 years of experience in analog IC design at ON Semiconductor, Intel, Maxim-IC, TI and NXP.

Personalised demo

Ready to see Amplifa Marketplace in action?

From a structured request to the right manufacturing partner: AI-assisted matching, verified suppliers and transparent metrics — in one place for industrial companies across the DACH region.

Request a demo