Engineering and automation technology as well as machinery for the production of district heating pipes
JARUS GmbH
83026 Rosenheim (Headquarters) · 83075 Bad FeilnbachNew on Amplifa
Services
JARUS GmbH is an engineering office founded in 1999, headquartered in Rosenheim with a location in Bad Feilnbach, specializing in electrical and automation engineering. Its range of services includes specification preparation (basic, general, project and detail engineering), hardware planning and design, software development and PLC programming, as well as commissioning, plant optimization and documentation. Programmable logic controllers from renowned manufacturers such as Siemens Simatic S5/S7, Klöckner Möller, Allen Bradley IPC and AEG are in use, supplemented by control modules, bus systems and visualization systems. Since 1999, the company has specialized in district heating technology and delivers complete production lines for the manufacture of insulated district heating pipes, including electrical, electronic, mechanical and engineering services; in addition, JARUS modernizes existing production facilities mechanically and electrically. Reference customers include BMW Munich, DASA, Mercedes Benz Wörth, Siemens as well as Gaztrubplast Moscow and Isoplus Hohenberg with continuous production lines for insulated district heating pipes. Commissioning has taken place, among other places, in France, Russia, Tunisia, the USA, Belgium, the Netherlands and Austria.
- Site
- Bad Feilnbach
- Processes
- Plant planning / project engineering, Automation / visualization, Commissioning / optimization, Engineering services in control and regulation technology, Drive technology, High and low voltage technology, Creation and revision of circuit diagrams, Manufacture of control systems and electrical assembly
- Materials
- PEX (inner pipe), Steel (steel pipes), PE (outer protective jacket), 2K foam (insulating foam), Steel pipe, PE (protective jacket)
- Certificates
- Pipe View (quality control)
- Founded
- 1999
- Industries
- District heating technology, Automotive industry, Aerospace, Postal/logistics automation, Electronics, Packaging machinery
- 01
Specification preparation (basic, general, project, detail engineering)
- 02
Hardware planning and design (circuit, terminal and cable diagrams)
- 03
Software development and PLC programming
- 04
Manufacture of control systems and electrical assembly
- 05
Commissioning and plant optimization
- 06
Documentation and training
Materials and Components
PEX (inner pipe)
Inner pipe of the district heating pipe, unwound from the drum and preheated in the heating tunnel.
Steel pipe
Alternative inner pipe, for which single-piece separation is provided instead of pipe unwinding.
2K foam (insulating foam)
Insulating foam that is fed via dynamically activated alternating mixing heads.
PE (protective jacket)
Outer protective jacket of the pipe, applied via the extruder with subsequent cooling section.
Locations
Rosenheim
DEHeadquarters / Office
Bad Feilnbach
DELocation
Components and Plants
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Plant planning / project engineeringEngineering | – | – | – | – | – |
| Automation / visualizationEngineering | – | – | – | – | – |
| Commissioning / optimizationEngineering | – | – | – | – | – |
| Engineering services in control and regulation technologyEngineering | – | – | – | – | – |
| Drive technologyEngineering | – | – | – | – | – |
| High and low voltage technologyEngineering | – | – | – | – | – |
| Creation and revision of circuit diagramsEngineering | – | – | – | – | – |
| Manufacture of control systems and electrical assemblyAssembly | – | – | – | – | – |
| Development and manufacture of custom industrial electronicsAssembly | – | – | – | – | – |
| Mechanical and electrical modernization of existing production facilitiesEngineering | – | – | – | – | – |
| Specification preparation (basic, general, project, detail engineering)Engineering | – | – | – | – | – |
| Hardware design (circuit, terminal and cable diagrams, allocation plans)Engineering | – | – | – | – | – |
| PLC software development and programmingEngineering | – | – | – | – | – |
| Machines for the production of district heating pipes (district heating technology production line)Plastics | – | – | – | – | PEX, Stahl, PE, 2K-Schaum |
| Pipe View (quality control of pipelines)Testing | – | – | – | – | – |
6 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| – | JARUS (Engineering/Control) | – | – | – | – |
| Central PLC controller | Siemens Simatic S7 | – | – | – | – |
| Programmable logic controllers (PLC) | Siemens Simatic S5, S7 | – | – | – | – |
| PLC / automation systems | Klöckner Möller | – | – | – | – |
| IPC / automation systems | Allen Bradley IPC | – | – | – | – |
| PLC / automation systems | AEG | – | – | – | – |
Additional services
Reference customers
Quality
Pipe View is an option for quality control of pipelines. The production line is managed via a central Siemens S7 controller; individual terminals display the operating states of the modules.
| Evidence | Rosenheim |
|---|---|
| Pipe View (quality control) |
History
- 1999
Founding of the company with specialization in district heating technology
More than 15 years of company history with projects including at BMW, DASA, Mercedes Benz and Siemens