Manufacturer of porous sintered plastic filter elements made of PE-porös for liquid and gas filtration
KIK Kunststofftechnik
Kleinblittersdorf (Saarbrücker Straße 128, 66271)New on Amplifa
About KIK Kunststofftechnik
KIK Kunststofftechnik from Kleinblittersdorf manufactures filter elements and molded parts from porous polyethylene (HDPE/UHMWPE) under the designation PE-porös. Production takes place in a special sintering process in which plastic granules are heated until their surfaces soften and fuse at the contact surfaces; the resulting molded body has open, continuous pores. Filter media are produced in almost any geometry and filtration ratings from 1 µm to well over 100 µm – as filter tubes, filter cartridges, filter rods and capillaries, filter plates, filter discs, as well as custom molded parts that are sintered directly into shape. In addition to the filtration of liquids and gases, the porous molded bodies are used for venting and aeration, storage of media and sound attenuation, for example in the chemical industry, food and drinking water technology, medical and laboratory technology, automotive engineering and pneumatics. Surface modifications (hydrophilic, hydrophobic, antibacterial, antistatic) and fillers such as activated carbon or molecular sieves extend the range of applications; for more demanding requirements, partnerships exist for porous alternatives made of glass, ceramic and metal.
- Site
- Kleinblittersdorf
- Processes
- Sintering of porous polyethylene (PE-porös) into filter elements and molded parts, Production of filter tubes, filter cartridges, filter rods/capillaries, filter plates, filter discs, Stamped parts from filter plates to customer specification, Welding of connection parts onto filter molded parts / assembly, Sintering of porous plastic molded parts (PE-porös), Production of filter media in customer-specific geometries, Filtration ratings from 1 µm to over 100 µm, Production of filter tubes, filter cartridges, filter plates, filter discs, filter rods/capillaries
- Materials
- Porous polyethylene HDPE, UHMWPE (ultra-high molecular weight polyethylene), PE-porös antistatic (FDA), PE-porös filled (activated carbon, molecular sieves), Glass (porous, cooperation partner), Ceramic (porous, cooperation partner), Metal (porous, cooperation partner), Porous polyethylene (HDPE/UHMWPE)
- Certificates
- DIN EN 60335 – Class M, EN 1822 – Class H10, FDA / VO 10/2011/EU
- Industries
- Filtration (liquid and gas filtration), Chemicals, Food and drinking water sector, Medical/laboratory technology, Automotive engineering, Sensor technology
- 01
Sintering of PE granules into porous molded bodies (PE-porös)
- 02
Production of filter tubes, cartridges, plates, discs and rods
- 03
Stamped parts and blanks to customer specification
- 04
Welding of connection parts / assembly of filter elements
- 05
If required, surface modification or filling (activated carbon, molecular
Materials & Processes
Porous polyethylene (HDPE/UHMWPE)
Sintered plastic with open continuous pores for liquid and gas filtration, venting and aeration, storage and attenuation.
PE-porös antistatic (FDA)
High operational safety in the separation of critical, explosive dusts without impairment of the filtration properties.
PE-porös filled (activated carbon, molecular sieves)
Filled products for extended applications, e.g. adsorption.
Surface modification (hydrophilic, hydrophobic, antibacterial)
Filter elements adapted to the respective media and application conditions.
Porous alternatives in glass, ceramic and metal
For requirements beyond the properties of porous sintered plastics, realized with specialized cooperation partners.
Locations
Kleinblittersdorf
DEHeadquarters and production
- Lot size
- Sample parts at short notice; also small series
- Materials
- HDPE (UHMWPE)
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Sintering of porous polyethylene (PE-porös) into filter elements and molded partsPlastics | – | 1000 mm (filter tubes/filter × 500 mm (filter plates) | – | Small series possible | HDPE (UHMWPE) |
| Production of filter tubes, filter cartridges, filter rods/capillaries, filter plates, filter discsPlastics | – | 1000 mm × 500 x 500 mm | – | Small series | HDPE (UHMWPE) |
| Stamped parts from filter plates to customer specificationPlastics | – | – | – | – | HDPE (UHMWPE) |
| Welding of connection parts onto filter molded parts / assemblyJoining | – | – | – | – | HDPE |
Additional services
Quality & Conformities
KIK characterizes filter elements by mean pore sizes (maximum of the pore distribution); a narrow pore distribution is targeted as a quality feature. Named conformities are DIN EN 60335 Class M, EN 1822 Class H10 as well as FDA / Regulation (EC) 10/2011.
| Evidence | Kleinblittersdorf |
|---|---|
| DIN EN 60335 – Class M | |
| EN 1822 – Class H10 | |
| FDA / VO 10/2011/EU |
History
- 2025
Updated datasheet and price list 'Filtration with PE-porös' (as of 01.01.2025)