Planning, manufacturing and installation of crash-tested vehicle equipment for commercial vehicles in Switzerland.
KINTEC GmbH
Einsiedeln (headquarters, workshop) · Bern (Wünnewil-Flamatt) · Lucerne (Risch-Rotkreuz) · Geneva (Gland) · SamstagernNew on Amplifa
About KINTEC GmbH
KINTEC GmbH from Einsiedeln in the canton of Schwyz has been fitting out commercial vehicles as mobile workshops since 2020. The company plans, manufactures and installs vehicle equipment: aluminium shelving and drawer systems, floor panels and wall cladding, load securing with lashing rails and bulkheads, as well as roof racks, roof galleries, ladder holders, glass carriers, cases and boxes. Planning is done with 3D visualisation and a fixed-price quote; installation takes place in the company's own workshop in Einsiedeln, and the vehicle is collected and returned free of charge. The equipment systems are based on DD11 steel as well as the aluminium alloys EN AW-5754 and EN AW-5005 and are crash-tested according to INRS NS286 and ECE R17. Customers come from the trades and commerce, building services, electrical installation, facility management and delivery services. With five locations and 21 partner companies, KINTEC operates throughout Switzerland; by January 2026, more than 2'500 vehicles had been fitted out.
- Site
- Einsiedeln
- Processes
- Vehicle equipment / equipment systems (shelving and drawer systems), Load securing (lashing rails, bulkheads, nets, brackets), Roof gallery and roof rack (ladder holders, pipe transport systems), Floor panels (anti-slip, oil-resistant, also aluminium tread plate), Wall cladding (panels, impact plate, wheel arch protection), 3D planning and consultation, Installation and fitting in own workshop (including retrofitting), Manufacturing of vehicle equipment (development and production, ISO 9001 certified)
- Materials
- Aluminium, Steel DD11, Aluminium alloy EN AW-5754, Aluminium alloy EN AW-5005, Birch multi-layer plywood, Impact-resistant ABS, Plastic, 3D planning and visualisation
- Certificates
- TÜV GS mark (product safety), UNI EN ISO 9001:2015, Crash test deceleration test (INRS standard NS286), Frontal impact ECE R17, ISO 9001, TÜV GS (product safety), Crash test INRS NS286
- Founded
- 2020
- Employees
- 12
- Industries
- Trades and commerce, Building services, Electrical installations, Service engineering, Facility management, Delivery service
- 01
Consultation and vehicle measurement
- 02
3D planning and fixed-price quote
- 03
Manufacturing of the equipment components
- 04
Pre-assembly
- 05
Installation in the workshop in Einsiedeln
- 06
Handover, briefing, warranty and service
Materials and Processes
Aluminium alloy EN AW-5754
Lightweight alloy for shelving and drawer systems, roof racks and floor panels in commercial vehicle fit-outs.
Aluminium alloy EN AW-5005
Aluminium alloy used in the certified equipment system, listed in the TÜV GS certificate.
Steel DD11
Mild steel for bulkheads, perforated panels, the steel line and metal cases of the vehicle equipment.
Impact-resistant ABS
Material of the KINTEC MetaBox and ToolBox case systems with IP43 protection.
Birch multi-layer plywood
Anti-slip, oil-resistant floor panels in 9 or 12 mm thickness.
3D planning and visualisation
Individual equipment planning as a 3D visualisation with a fixed fixed-price quote before installation.
Locations
Einsiedeln
CHHeadquarters, workshop and manufacturing
- Part weight / size
- approx. 15–50 kg per fit-out
- Lot size
- Single vehicles to fleets
- Materials
- Aluminium, steel, plastic, birch multi-layer plywood
- 3D planning software
- Workshop equipment for installation and retrofitting
Bern (Wünnewil-Flamatt)
CHLocation
Lucerne (Risch-Rotkreuz)
CHLocation
Geneva (Gland)
CHLocation
Samstagern (Cargofield GmbH)
CHLocation (partner)
Products and Components
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Vehicle equipment / equipment systems (shelving and drawer systems)Assembly | – | – | – | – | Aluminium, Steel |
| Load securing (lashing rails, bulkheads, nets, brackets)Assembly | – | – | – | – | Steel, Aluminium |
| Roof gallery and roof rack (ladder holders, pipe transport systems)Assembly | – | – | – | – | Aluminium, Steel |
| Floor panels (anti-slip, oil-resistant, also aluminium tread plate)Assembly | – | – | – | – | Birch multi-layer plywood, Aluminium |
| Wall cladding (panels, impact plate, wheel arch protection)Assembly | – | – | – | – | Plastic, Aluminium, Wood |
| 3D planning and consultationEngineering | – | – | – | – | – |
| Installation and fitting in own workshop (including retrofitting)Assembly | – | – | – | – | – |
| Manufacturing of vehicle equipment (development and production, ISO 9001 certified)General manufacturing | – | – | approx. 15 kg (small fit-out) – approx. 50 kg (complete fit-out) | – | Steel DD11, EN AW-5754, EN AW-5005 |
| Glass carrier / glass rack (A-frame construction, inside or outside)Assembly | – | – | – | – | Aluminium, Steel |
| Loading tube / Q-Top Carry-System Tube (transport tube, waterproof)Assembly | – | – | – | – | Aluminium |
| Cases and boxes (system cases, tool boxes)Assembly | – | – | – | – | ABS (impact-resistant), Aluminium, Steel, Plastic |
| Cargo box and vehicle construction (custom-made aluminium box, complete fit-out)Assembly | – | – | – | – | Aluminium |
| Crash test / testing (deceleration test per INRS NS286, frontal impact per ECE R17)Testing | – | – | – | – | – |
| WISTRA Twist-Beam locking bar (load securing)Assembly | – | 1900 to 2500 mm | – | – | Aluminium |
Additional services
Reference customers
Quality and Certification
Manufacturing is certified according to UNI EN ISO 9001:2015; the installed equipment system carries the TÜV GS mark and has been crash-tested according to INRS NS286 (deceleration test) and ECE R17 (frontal impact). Certified load capacities of the shelf panels and drawers are listed in the TÜV GS certificate; warranty: 9 years on the aluminium line, 3 years on the steel line.
| Evidence | Einsiedeln |
|---|---|
| ISO 9001 | |
| TÜV GS (product safety) | |
| Crash test INRS NS286 | |
| Frontal impact ECE R17 |
History
- 2020
KINTEC GmbH founded by Spend Kaziu on 17 February 2020 in Einsiedeln
- 2026
More than 2'500 vehicles fitted out by January 2026; five locations and 21 partner companies in Switzerland