Contract manufacturing of sheet metal parts and assemblies through 2D and 3D laser cutting, bending, machining and assembly.
Laser Produktions- und Technologiegesellschaft mbH
Meschede-FreienohlNew on Amplifa
About Laser Pro Tec
Laser Pro Tec GmbH, based in Meschede-Freienohl, is a contract manufacturing company for 2D and 3D laser cutting, CNC bending, countersinking, thread tapping and drilling as well as assembly production. Founded in 1994, the company operates four CNC laser cutting machines from Amada, including two fiber lasers and a 5-axis machine for the 3D machining of deep-drawn parts, tubes and profiles. Production is carried out in steel, stainless steel, aluminium and brass in formats up to max. 3000 x 1500 mm – from single pieces and small series through to volume production. Design is performed with modern 3D CAD/CAM software (SolidWorks, Sheetworks, Prolas 3D, VECTORCAM); ready-to-install assemblies are assembled in cooperation with experienced partners. The quality management system is certified to DIN EN ISO 9001:2015, and with supplier approval from Rolls-Royce the company also supplies the aerospace industry. In 2025, the management was handed over to the second generation; the sensor division was spun off to PR Sensorsystems.
- Site
- Meschede-Freienohl
- Processes
- 2D laser cutting (fusion cutting and flame cutting), 3D laser cutting (5-axis, deep-drawn parts, tubes and profiles), CNC bending, Countersinking, Thread tapping, Drilling, Assembly production/assembly (ready-to-install assemblies, sheet metal components, tube and profile, Design (3D CAD/CAM, SolidWorks, Sheetworks, Prolas 3D, VECTORCAM)
- Materials
- S235 JR (St-37), S355 J2 (St-52), S420 MC (QstE 380), DC01 (St-12.03), Stainless steel 1.4301 (2B, 1D, 2R, K240), Stainless steel 1.4571 (2B, 1D), AlMg3 (EN AW-5754), MS63 (CuZn37)
- Certificates
- DIN EN ISO 9001:2015, ISO 9001
- Founded
- 1994
- Industries
- Aerospace industry, Sheet metal / metal processing
- 01
Design (3D CAD/CAM)
- 02
2D laser cutting
- 03
3D laser cutting
- 04
CNC bending
- 05
Countersinking, thread tapping, drilling
- 06
Assembly production
- 07
Assembly with partners
Materials & Processes
S235 JR (St-37)
Structural steel for laser cutting of 4–20 mm material thickness in formats up to 3000 x 1500 mm.
S355 J2 (St-52)
Higher-strength structural steel for load-bearing sheet metal parts in the 4–20 mm range.
S420 MC (QstE 380)
Fine-grained structural steel for high-strength components with 10–20 mm sheet thickness.
DC01 (St-12.03)
Cold-rolled sheet steel for thin-walled parts from 0.5–3 mm.
Stainless steel 1.4301
Stainless steel in various surface finishes (2B, 1D, 2R, K240) for corrosion-resistant components.
Stainless steel 1.4571
High-alloy, acid-resistant stainless steel with additions of molybdenum and titanium.
AlMg3 (EN AW-5754)
Aluminium alloy for lightweight sheet metal components from 0.5–10 mm material thickness.
MS63 (CuZn37)
Brass for thin precision parts from 0.5–4 mm sheet thickness.
Locations
Meschede-Freienohl
DEManufacturing and administration
- Lot size
- Single pieces to volume production
- Materials
- Steel, stainless steel, aluminium, brass
- 2D CNC laser cutting machines (Amada, fiber laser, up to 3000 x 1500 mm)
- 5-axis laser cutting machine (Amada, 3D)
- 2 CNC press brakes (Amada)
- Mechanical machining center
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| 2D laser cutting (fusion cutting and flame cutting)Cutting/Separation | – | 3000 mm × 1500 mm | – | Single piece – Volume production | Steel, Stainless steel, Aluminium, Brass |
| 3D laser cutting (5-axis, deep-drawn parts, tubes and profiles)Cutting/Separation | – | – | – | – | Steel, Stainless steel, Aluminium |
| CNC bendingForming | – | – | – | – | Steel, Stainless steel, Aluminium |
| CountersinkingMachining | – | – | – | – | Steel, Stainless steel, Aluminium |
| Thread tappingMachining | – | – | – | – | Steel, Stainless steel, Aluminium |
| DrillingMachining | – | – | – | – | Steel, Stainless steel, Aluminium |
| Assembly production/assembly (ready-to-install assemblies, sheet metal components, tube and profileAssembly | – | – | – | – | Steel, Stainless steel, Aluminium |
| Design (3D CAD/CAM, SolidWorks, Sheetworks, Prolas 3D, VECTORCAM)Engineering | – | – | – | – | – |
5 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| CNC laser cutting machine (2D, fiber laser) | Amada | 2 | up to max. 3000 x 1500 mm | – | Meschede/Freienohl |
| 5-axis laser cutting machine (3D) | Amada | 1 | – | – | Meschede/Freienohl |
| CNC laser cutting machine (further, 4 machines in total) | Amada | 1 | – | – | Meschede/Freienohl |
| CNC press brake | Amada | 2 | – | – | Meschede/Freienohl |
| Mechanical machining center | – | 1 | – | – | Meschede/Freienohl |
Additional services
Reference customers
Quality & Certification
The quality management system for the manufacture of metal components by laser processing with downstream processes of bending, machining and assembly production has been certified to DIN EN ISO 9001:2015 since 2008. In addition, the company holds supplier approval from Rolls-Royce for supplying the aerospace industry.
| Evidence | Meschede-Freienohl |
|---|---|
| ISO 9001 |
Development & Milestones
- 1994
Foundation as a laser contract manufacturing business by Dietmar Pütz and Karl Rocholl in Meschede-Brumlingsen.
- 1997
Takeover of the European representation of FIST, Japan (LaserProCut and LaserCap sensors).
- 2008
Certification of the quality management system to ISO 9001.
- 2025
Handover of management to Lisa-Marie Pütz and Holger Reichardt; spin-off of the sensor division to PR Sensorsystems.