Manufacture of custom steam turbine packages from 0.2 to 30 MW for industrial power generation and CHP.
M+M Turbinen-Technik GmbH
Bad Salzuflen · BerlinNew on Amplifa
About M+M Turbinen-Technik
Founded in 1995 and owner-managed, M+M Turbinen-Technik GmbH is a family company headquartered in Bad Salzuflen specializing in the design and manufacture of custom steam turbines. The product portfolio covers backpressure, condensing, extraction and induction turbines, district heating/CHP turbines, mini turbines as well as custom special designs in the power range from 0.2 to 30 MW (condensing up to 35 MW). The turbine packages are delivered as complete solutions from a single source, from design through engineering and manufacturing to assembly and commissioning, including thermal condensing systems, transformer substations, piping and foundation/structural steel design. Fields of application include biomass, chemicals, food, paper, geothermal energy, power plants, sewage sludge and waste incineration as well as waste heat recovery. With more than 200 turbines delivered and an export share of around 70%, the company supplies customers in more than 39 countries. In addition, M+M offers maintenance, upgrades, spare parts management, technical support with remote maintenance, as well as factory inspection and major overhaul.
- Site
- Bad Salzuflen
- Processes
- Manufacture of custom steam turbine packages (design, engineering, manufacturing, assembly,, Backpressure turbine (CHP), Condensing turbine (impulse turbine principle, multi-stage), Extraction turbine (controlled extractions, also under vacuum), Induction turbine (multiple steam admissions/pressure levels), District heating/CHP turbine (two-stage thermal condensing), Mini turbine for low steam flows, Turbine special designs (M+M Specials)
- Materials
- Backpressure Turbine, Condensing Turbine, Extraction Turbine, Induction Turbine, District Heating/CHP Turbine, Mini Turbine, M+M Special Designs
- Certificates
- DIN EN ISO 9001:2015, DIN EN ISO 14001:2015, ISO 9001, ISO 14001
- Founded
- 1995
- Industries
- Biomass, Chemicals, Food, Paper, Geothermal energy, Power plants
- 01
Consultation and requirements capture
- 02
Design/Engineering
- 03
Manufacturing
- 04
Assembly and commissioning
- 05
Service: maintenance, spare parts, upgrades, major overhaul
Turbine Types and Processes
Backpressure Turbine
Uses process steam for combined heat and power generation (CHP), exhaust pressure up to 40 bar abs.
Condensing Turbine
Multi-stage impulse turbine for maximum power generation, 0.2–35 MW, exhaust pressure 0.04–0.6 bar abs.
Extraction Turbine
Controlled steam extractions at various pressure levels, also under vacuum, for flexible process integration.
Induction Turbine
Steam admission from multiple pressure levels for flexible integration into existing processes.
District Heating/CHP Turbine
Two-stage thermal condensing for applications where heat is the primary objective.
Mini Turbine
For low steam flows with optimal efficiency.
M+M Special Designs
Custom turbine solutions for unusual project requirements.
Locations
Bad Salzuflen
DEHeadquarters and production
- Lot size
- Single-unit production / project manufacturing
- Materials
- Steel, stainless steel, castings
- Turbine manufacturing
- Turbine assembly
- Factory inspection and major overhaul
- Measurement/Testing
Berlin
DEOffice
Turbine Types
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Manufacture of custom steam turbine packages (design, engineering, manufacturing, assembly,Engineering | – | – | – | – | – |
| Backpressure turbine (CHP)Engineering | – | – | – | – | – |
| Condensing turbine (impulse turbine principle, multi-stage)Engineering | – | – | – | – | – |
| Extraction turbine (controlled extractions, also under vacuum)Engineering | – | – | – | – | – |
| Induction turbine (multiple steam admissions/pressure levels)Engineering | – | – | – | – | – |
| District heating/CHP turbine (two-stage thermal condensing)Engineering | – | – | – | – | – |
| Mini turbine for low steam flowsEngineering | – | – | – | – | – |
| Turbine special designs (M+M Specials)Engineering | – | – | – | – | – |
| Maintenance and servicing of steam turbinesAssembly | – | – | – | – | – |
| Upgrades/retrofits for efficiency and performance increasesAssembly | – | – | – | – | – |
| Spare parts managementAssembly | – | – | – | – | – |
| Technical support including remote maintenance via modemAssembly | – | – | – | – | – |
| Factory inspection and major overhaul (complete disassembly and inspection of all parts at theTesting | – | – | – | – | – |
| Technical modifications (control system, steam path, operating pressures)Assembly | – | – | – | – | – |
| Turnkey complete solutions: thermal condensing systems, transformer substation, piping, cabling,Assembly | – | – | – | – | – |
1 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Steam turbine (backpressure/condensing/extraction/induction/CHP/mini) | M+M Turbinen-Technik e.g. KT-520-8 A4E7, KET 770 – 3/2 | 200+ | Power range 0.2 – 30 MW (condensing turbine: 0.2 – 35 MW; extraction/induction: 0.6 – 25 MW); | – | Bad Salzuflen, Germany |
Additional services
Reference customers
Quality and Certification
The quality and environmental management system is certified to DIN EN ISO 9001:2015 and DIN EN ISO 14001:2015 (initial certification 2020, pdcaCert GmbH). As part of the factory inspection, turbines are completely disassembled at the factory and all parts are inspected.
| Evidence | Bad Salzuflen |
|---|---|
| ISO 9001 | |
| ISO 14001 |
Company History
- 1995
Founding; since then manufacture of custom steam turbine solutions
- 2020
Initial certification DIN EN ISO 9001 and ISO 14001
- 2022
Delivery of a 20.4 MW turbine to EVSE Schwerin