Manufacturing and assembly of window trim components such as lintel boards and window sills as well as interior joinery made of wood-based materials
Marobag AG
Dänikon ZH (Headquarters · Manufacturing facility)New on Amplifa
About Marobag AG
Marobag AG (MAyer RObert Bauteile AG) is a joinery company with its own manufacturing facility in Dänikon ZH. The company mainly produces typed and standardized components for building construction: lintel boards, window sills (angle and flat sills), roller shutter boxes, lintel boards, doors (frame lining doors, frame doors, exterior doors and apartment entrance doors), electrical front panels (EI30, non-combustible), built-in cabinets, stair railings, balustrade claddings, balustrade covers, media duct claddings as well as general interior fit-out and basement fit-outs. The products are created as variable, modular system products or as customer-specific individual solutions on modern equipment, including a CNC Rover B/Edge-banding with Synchro-Handling system commissioned in 2023, an edge bander and a cladding machine. The value chain comprises consulting, planning, manufacturing, assembly and service. Customers are developers and general contractors of residential and commercial buildings, schools, hospitals, retirement homes, banks, churches as well as commercial and office buildings. The products are sold and installed in German-speaking Switzerland and Ticino; French-speaking Switzerland is served by the sister company Marobag SA.
- Site
- Dänikon ZH
- Processes
- Consulting – Planning – Manufacturing – Assembly – Service (joinery work, interior fit-out), Lintel board manufacturing, Window sills / angle sills / flat sills (sills), Roller shutter box manufacturing, Doors (frame lining doors, frame doors, exterior doors, apartment entrance doors), Electrical front panels (EI30, non-combustible), Cabinets / built-in cabinets, Stair railings, balustrade claddings, balustrade covers, media duct claddings
- Materials
- Wood-based materials, Non-combustible components EI30
- Founded
- 1970
- Industries
- Construction/Building construction (residential and commercial buildings), Schools, Hospitals, Retirement homes, Banks, Commercial and office buildings
- 01
Consulting
- 02
Planning / Estimating / Quotation
- 03
Manufacturing
- 04
Assembly
- 05
Service
Materials and Processes
Wood-based materials
Base material for window trim components, doors, cabinets and interior fit-out components; further materials and manufacturing techniques have been continuously introduced.
Non-combustible components EI30
Electrical front panels in a non-combustible design according to EI30.
Locations
Dänikon ZH
CHHeadquarters and manufacturing facility
- Materials
- Wood-based materials
- CNC Rover B/Edge-banding with Synchro-Handling system
- Edge bander
- Cladding machine
Products and Components
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Consulting – Planning – Manufacturing – Assembly – Service (joinery work, interior fit-out)Assembly | – | – | – | – | Holzwerkstoffe |
| Lintel board manufacturingPlastics | – | – | – | – | – |
| Window sills / angle sills / flat sills (sills)Plastics | – | – | – | – | – |
| Lintel board manufacturingPlastics | – | – | – | – | – |
| Roller shutter box manufacturingPlastics | – | – | – | – | – |
| Doors (frame lining doors, frame doors, exterior doors, apartment entrance doors)Assembly | – | – | – | – | – |
| Electrical front panels (EI30, non-combustible)Assembly | – | – | – | – | – |
| Cabinets / built-in cabinetsAssembly | – | – | – | – | – |
| Stair railings, balustrade claddings, balustrade covers, media duct claddingsAssembly | – | – | – | – | – |
| General interior fit-out / basement fit-outs / general joinery work (BKP 273.0, 273.1, 273.3,Assembly | – | – | – | – | – |
| Cladding (cladding machine, coating/cladding of components)Surface | – | – | – | – | – |
| Edge banding (edge bander)Joining | – | – | – | – | – |
3 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| CNC Rover with edge banding and Synchro-Handling system | CNC Rover B/Edge-banding with Synchro-Handling system | 1 | – | 2023 | Dänikon ZH (rented hall) |
| Edge bander | – | – | – | – | Dänikon ZH |
| Cladding machine | – | – | – | – | Dänikon ZH |
Additional services
Reference customers
History
- 1963
Robert Mayer founds a joinery at Zurlindenstrasse 218 in Zurich
- 1968
Focus on lintel boards and window sills; expansion of the product range to window trim components with typing and standardization
- 1970
Foundation of MAROBAG (MAyer RObert Bauteile AG)
- 1976
Relocation to the current site in Dänikon
- 1985
Building extension
- 1996
Foundation of the subsidiary Marobag Crissier SA (later Marobag Romandie SA) for French-speaking Switzerland
- 2006
Robert Mayer hands over the company to Jean-Jacques Gunzinger
- 2015
Thomas and Claudia Gross acquire Marobag
- 2023
Stephan Willax becomes Managing Director; major investment in a CNC Rover B/Edge-banding with Synchro-Handling system in a rented hall