Manufacturer of PV modules (TOPCon, HJT, IBC, 1/3-Cut) for residential, commercial and ground-mounted installations
Maysun Solar (Zhejiang Ganghang Solar Technology Co., Ltd.)
Hangzhou (Headquarters) · Huzhou (Production, CN) · Dubai (Production, AE) · Neuss · Düsseldorf · Budapest · Milan · Gap · Warsaw · Bruinisse · Jakarta · RiyadhNew on Amplifa
About Maysun Solar
Maysun Solar is a brand of Zhejiang Ganghang Solar Technology Co., Ltd., founded in Hangzhou in 2008, and manufactures photovoltaic modules for residential, commercial, agri and ground-mounted installations. Module manufacturing is based on N-TOPCon, HJT and IBC cell technologies as well as Half-Cut, 1/3-Cut, Shingled and bifacial glass-glass constructions, with module outputs of approximately 420 to 720 W. Production takes place on fully automated production lines at two production sites: Huzhou (Zhejiang, China) with 1 GW annual capacity and Dubai (Jebel Ali Free Zone, UAE) with 200 MW annual capacity; according to the 2025 brochure, a total of 2 GW is planned or stated. Every module undergoes EL testing, flash testing, visual inspection, dielectric voltage testing and performance testing. With sales offices in several European countries, 21 regional warehouses and customers in over 60 countries, the company also supplies the DACH market; in addition, it is active in the development of and investment in C&I rooftop PV projects as well as in the acquisition of ready-to-build projects.
- Site
- Neuss
- Processes
- PV module manufacturing (N-TOPCon, N-type, bifacial, 9BB/Half-Cut, 120 cells 12*10), HJT PV module manufacturing (heterojunction, PECVD + PVD, Half-Cut), IBC PV module manufacturing (interdigitated back contact, rear-side contact), 1/3-Cut module production (Twisun Pro, triple-cut, bifacial, glass-glass), Shingled module production (laser slicing, conductive adhesive ECA, low-temperature bonding,, Half-Cut / cell splitting technology (wafer cutting without damage), Bifacial module manufacturing (glass-glass and transparent backsheet technology), PERC cell manufacturing (mentioned in the technology comparison)
- Materials
- Monocrystalline silicon (N-type), Monocrystalline silicon (p-type, PERC), Polycrystalline silicon, Amorphous silicon (a-Si:H), Indium tin oxide (ITO), Silicon dioxide (SiO2), Silicon nitride (SiNx), Aluminium oxide (Al2O3)
- Certificates
- TÜV SÜD (IEC 61215 / IEC 61730), CE (EN 61730), TÜV NORD (Shingled modules), ISO / IEC / MCS / CE, CE (SGS)
- Founded
- 2008
- Industries
- Photovoltaics, Residential buildings, Commercial & industrial, Agriculture (Agri-PV), Ground-mounted PV, BIPV
- 01
Wafer (monocrystalline silicon)
- 02
Cell process (texturing, diffusion, PECVD/PVD, screen printing, firing)
- 03
Module stringing (Half-Cut/1/3-Cut/Shingled, ECA)
- 04
Lamination (glass-glass/backsheet)
- 05
Module testing (EL, flash, visual inspection, insulation, performance)
- 06
Warehousing and distribution via 21 regional warehouses
- 07
Project development and after-sales service
Cell Technologies and Materials
Monocrystalline silicon (N-type)
Phosphorus-doped N-type wafers with tunnel oxide and polycrystalline doping layer for TOPCon cell manufacturing.
Amorphous silicon (a-Si:H) / ITO
Heterojunction structure with intrinsic and doped a-Si layers plus indium tin oxide as transparent conductive layer, deposited via PECVD and PVD.
Silicon dioxide (SiO2) / silicon nitride (SiNx)
Passivation and anti-reflection layers on IBC cells with rear-side contacts made of silver, nickel and copper.
Glass (glass-glass construction)
Bifacial modules in glass-glass design or with transparent backsheet for dual-sided energy yield.
Electrically conductive adhesive (ECA)
Low-temperature bonding of Shingled modules using conductive silver adhesives instead of soldered interconnects.
Sites
Huzhou (Zhejiang, China)
CNPV module production site
- Part weight / size
- Modules 1762 × 1134 × 30 mm, approx. 21 kg (Twisun Pro)
- Lot size
- Large series (pallet/container)
- Materials
- N-TOPCon, HJT, IBC, glass-glass
- Fully automated PV module production line
- EL test system
- Flash test system
Dubai (Jebel Ali Free Zone, UAE)
AEProduction site and office
- PV module production line
Neuss
DESales office (Maysun Solar GmbH)
Düsseldorf
DESales office (PV Global GmbH)
Modules and Products
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| PV module manufacturing (N-TOPCon, N-type, bifacial, 9BB/Half-Cut, 120 cells 12*10)Assembly | – | – | – | 1 GW annual production capacity (Huzhou) | N-type monocrystalline silicon (phosphorus-doped), Silicon oxide (tunnel oxide 1–2 nm), Polycrystalline silicon (doping layer), Aluminium oxide Al2O3, Silicon nitride SiNx, Silver, Screen-print paste |
| HJT PV module manufacturing (heterojunction, PECVD + PVD, Half-Cut)Assembly | – | – | – | 420–720 W module output | Monocrystalline silicon (N-type, 210 mm cells), Amorphous silicon (a-Si:H, intrinsic and doped), Indium tin oxide (ITO/TCO), Silver (low-temperature paste, 200°C), Metal stack (PVD) |
| IBC PV module manufacturing (interdigitated back contact, rear-side contact)Assembly | – | – | – | 425–600 W module output | Monocrystalline silicon (N-type c-Si), Silicon dioxide SiO2 (passivation/ARC), Silicon nitride SiNx, Boron nitride BNx, Boron (doping), Silver, Nickel, Copper |
| 1/3-Cut module production (Twisun Pro, triple-cut, bifacial, glass-glass)Assembly | – | 1762 mm × 1134 mm × 30 mm | 21 kg | 430 W–460 W module output; 36 | N-TOPCon silicon, Glass-glass construction, Conductive adhesive (ECA, Shingled variant) |
| Shingled module production (laser slicing, conductive adhesive ECA, low-temperature bonding,Assembly | – | – | – | – | Silicon solar cells, Conductive silver adhesives (ECA) |
| Half-Cut / cell splitting technology (wafer cutting without damage)Assembly | – | – | – | – | Silicon solar cells |
| Bifacial module manufacturing (glass-glass and transparent backsheet technology)Assembly | – | – | – | – | Glass (front), Transparent backsheet or glass (rear), Bifacial solar cells (PERC, TOPCon, HJT) |
| PERC cell manufacturing (mentioned in the technology comparison)Assembly | – | – | – | – | P-type monocrystalline silicon |
| Module testing: EL testing, flash testing, visual inspection, dielectric voltage testing,Testing | – | – | – | – | – |
| TOPCon cell process: texturing, boron diffusion (LP-BBr3), laser selective emitter, chemicalAssembly | – | – | – | – | N-type silicon wafers, Boron tribromide BBr3, Aluminium oxide, Silicon nitride, Silver paste |
4 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| PV module production line (fully automated) | – | – | – | 2009 | Huzhou, Zhejiang, China |
| PV module production line | – | – | – | 2015 | Dubai (Jebel Ali Free Zone), UAE |
| EL test system | – | – | – | – | – |
| Flash test system | – | – | – | – | – |
Additional services
Quality and Certification
Every module undergoes EL testing, flash testing, visual inspection, dielectric voltage testing and performance testing; production is regularly inspected by TÜV and SGS. The modules are certified to IEC 61215 and IEC 61730 (TÜV) and meet CE requirements.
| Evidence | Huzhou (Zhejiang, China) | Dubai (Jebel Ali Free Zone, UAE) |
|---|---|---|
| TÜV SÜD (IEC 61215 / IEC 61730) | ||
| CE (SGS) | ||
| TÜV NORD (Shingled modules) |
Company History
- 2008
Founding of Zhejiang Ganghang Solar Technology Co., Ltd. in Hangzhou
- 2009
Production site Huzhou (Zhejiang) established, launch of the GH brand
- 2010
Subsidiary in Pakistan
- 2011
Office in Dubai (UAE)
- 2012
Offices in Jakarta and Riyadh
- 2013
Dubai production base established in the Jebel Ali Free Zone
- 2015
Launch of the Maysun Solar brand; Dubai production site goes into operation
- 2016
Offices in Poland and Hungary
- 2017
Offices in Germany and Italy
- 2021
Office in the Netherlands
- 2022
Expansion of warehouse partnerships in Europe; Romania warehouse in March 2022
- 2024
Expansion of integrated C&I PV solutions and project investments
- 2025
Deepened local presence and project partnerships