Additive series production of metal and plastic components using SLM and SLS processes, 1–5,000 parts per week.
Trivion 3d Druck & Engineering GmbH
Gröbming (Styria, AT)New on Amplifa
About Trivion
Trivion 3d Druck & Engineering GmbH is a company specialized in additive manufacturing, based in the Gröbming business park in the Styrian Enns Valley, Austria. Trivion started as a business unit of Doka in Amstetten and was spun off as an independent company in early 2024. The company manufactures series parts, prototypes and optimized components from metal and plastic using the SLM process (Selective Laser Melting) for titanium, aluminium, steel and Inconel as well as the SLS process (Selective Laser Sintering) for the polyamides PA12 and PA2200. Lot sizes range from a single part to 5,000 parts per week, without tooling costs. In addition to series production, Trivion offers component optimization with topology optimization, part consolidation and functional integration, rapid prototyping, stress-relief heat treatment, and project-specific painting and assembly. Customers come from medical technology, defence, rail, automotive, mechanical engineering, motorsport and hunting & shooting sports, including Doka Austria, Fine Ballistic Tools and NEULANDT. The processes are certified according to ISO 9001 and ISO 14001.
- Site
- A-8962 Gröbming
- Processes
- SLM – Selective Laser Melting (metal printing), SLS – Selective Laser Sintering (plastic printing), Additive series production, Component optimization (topology optimization, part consolidation, functional integration), Rapid prototyping, Additive series production (metal & plastic, 1–5,000 parts/week), Heat treatment (stress relief), Quality assurance/inspection reports
- Materials
- Titanium, Inconel, Steel, Aluminium, Polyamide PA2200, Polyamide PA12, 316L (stainless steel), Stainless steel 316L
- Certificates
- ISO 9001, ISO 14001
- Founded
- 2024
- Industries
- Medical technology, Defence, Rail, Automotive, Mechanical engineering, Racing/Motorsport
- 01
Consulting & feasibility check
- 02
Component optimization / data preparation
- 03
SLM or SLS printing
- 04
Removal & powder handling
- 05
Heat treatment / post-processing
- 06
Quality assurance & inspection report
- 07
Painting & assembly (project-specific)
Materials & Processes
Titanium
Highest strength at minimal weight, biocompatible and corrosion-resistant for weight-critical applications.
Aluminium
Lightweight construction with low weight, good thermal conductivity and solid strength.
Steel
High strength and wear resistance for robust components.
Inconel
Nickel-based superalloy for extreme temperatures and maximum loads.
Stainless steel 316L
Corrosion-resistant stainless steel, among other things for components with internal, polishable channels.
Polyamide PA12
SLS plastic for complex geometries without support structures, from prototype to large-scale series.
Polyamide PA2200
SLS plastic with reliable series quality.
SLM – Selective Laser Melting
Metal powder is fully melted layer by layer; dense, high-load components in a shielding gas atmosphere.
SLS – Selective Laser Sintering
Plastic powder is sintered; the surrounding powder supports the component, eliminating the need for support structures.
Location
Gröbming
ATProduction & Administration (Gröbming Business Park)
- Lot size
- 1–5,000 parts/week
- Materials
- Titanium, Aluminium, Steel, Inconel, Polyamide PA12, PA2200
- SLM 280 (SLM)
- Farsoon FS 350 (SLM)
- Farsoon Flight 403 (SLS)
- Formlabs Fuse 1+ (SLS)
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| SLM – Selective Laser Melting (metal printing)Additive | – | – | 5,000 units per week | 1 unit – 5,000 parts/week | Titanium, Aluminium, Steel, Inconel |
| SLS – Selective Laser Sintering (plastic printing)Additive | – | – | – | 1 unit – 5,000 parts/week | Polyamide PA2200, Polyamide PA12 |
| Additive series productionAdditive | – | – | – | 1 part/week – 5,000 parts/week | Titanium, Aluminium, Steel, Inconel, Polyamide PA12, Polyamide PA2200 |
| Component optimization (topology optimization, part consolidation, functional integration)Engineering | – | – | – | – | – |
| Rapid prototypingAdditive | – | – | – | – | Metal, Plastic |
4 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| SLM machine (laser powder bed) | SLM SLM 280 | – | – | – | Gröbming |
| SLM machine (laser powder bed) | Farsoon FS 350 | – | – | – | Gröbming |
| SLS machine (laser powder bed) | Farsoon Flight 403 | – | – | – | Gröbming |
| SLS machine (laser powder bed) | Formlabs Fuse 1+ | – | – | – | Gröbming |
Additional services
Reference customers
Quality
The processes are certified according to ISO 9001 and ISO 14001; from order acceptance through production to measurement, documented, repeatable procedures and inspection reports ensure the traceability of every component.
| Evidence | Gröbming |
|---|---|
| ISO 9001 | |
| ISO 14001 |
History
Started as a business unit of Doka in Amstetten
- 2024
Spun off as the independent company Trivion 3d Druck & Engineering GmbH, located in the Gröbming Business Park (Styria)