System supplier for compressed air technology, pneumatics and automation technology with engineering, assembly and all-round service.
UNIMATIC Druckluft- und Flüssigkeitstechnik GmbH
Norderstedt (Hamburg) · Stuhr (Bremen)New on Amplifa
From engineering office to system supplier
UNIMATIC Druckluft- und Flüssigkeitstechnik GmbH, based in Norderstedt near Hamburg, is a system supplier for compressed air technology, pneumatics and automation technology. Founded in 1970 as an engineering office, the company supports customers throughout the entire compressed air process: from requirements analysis and the design of piping systems to the generation of compressed air in low- and high-pressure technology through to treatment, distribution and maintenance. UNIMATIC constructs complete compressed air stations including piping made of aluminium composite pipe (TransAir), Cu pipe or stainless steel pipe, manufactures customer-specific assemblies and pneumatic control cabinets in its own engineering department, and develops its own nitrogen generation systems. The portfolio also includes electromechanics, gas springs & dampers (distribution of Stabilus), vacuum technology, measurement technology and rental compressors. Two locations in Norderstedt (Hamburg) and Stuhr (Bremen) enable fast deployment of service teams throughout northern Germany; delivery is regional and Europe-wide. Customers come from industries such as mechanical engineering, automotive, food, medical and packaging industries as well as aviation.
- Site
- Norderstedt
- Processes
- Compressed air generation (low and high pressure technology), Oil-injected screw compressors (sales/installation), Oil-free screw compressors (sales/installation), Piston compressors (sales/installation), High-pressure technology (breathing air/sports, industry, B-VirusFree), Nitrogen generation (in-house development), Compressed air distribution / compressed air treatment / drying technology / compressed air, Compressed air analysis & measurement technology (consumption measurement, pressure dew point
- Materials
- Aluminium composite pipe (TransAir), Cu pipe (copper), Stainless steel pipe, Aluminium composite pipe
- Certificates
- Pressure dew point measurement / air quality, TÜV pressure vessel inspections (preparation/support), Compressed air consumption measurement
- Founded
- 1970
- Industries
- Mechanical engineering, Vehicle construction, Automotive industry, Food industry, Agricultural machinery/agriculture, Medical technology
- 01
Requirements analysis and compressed air consumption measurement
- 02
Engineering / planning / design
- 03
Design of compressed air stations and piping systems
- 04
Assembly of subassemblies / pneumatic control cabinet construction
- 05
Construction of complete compressed air stations and piping
- 06
Commissioning and compressed air treatment (drying, filtration,
- 07
Maintenance, repair, leak detection and spare parts management
- 08
TÜV pressure vessel inspections and measurement technology (pressure dew point
Materials and processes
Aluminium composite pipe
Compressed air piping construction for fast, corrosion-free compressed air distribution.
Cu pipe (copper)
Piping construction for compressed air and fluid lines.
Stainless steel pipe
Piping construction for high requirements on media purity and resistance.
Locations
Norderstedt (Hamburg)
DEHeadquarters, sales, engineering, service
- Materials
- Aluminium composite pipe (TransAir), Cu pipe, stainless steel pipe
- Oil-injected screw compressors
- Oil-free screw compressors
- Piston compressors
- High-pressure compressors (BAUER COMPACT/PROFI LINE)
- High-pressure container system
- Nitrogen generation system (in-house development)
- Rotary vane compressors (maintenance/overhaul)
Stuhr (Bremen)
DEBremen site: sales and service for the Bremen/Lower Saxony region
- Oil-injected screw compressors
- Oil-free screw compressors
- Piston compressors
Components and parts
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Compressed air generation (low and high pressure technology)Engineering | – | – | – | – | – |
| Oil-injected screw compressors (sales/installation)Engineering | – | – | – | – | – |
| Oil-free screw compressors (sales/installation)Engineering | – | – | – | – | – |
| Piston compressors (sales/installation)Engineering | – | – | – | – | – |
| High-pressure technology (breathing air/sports, industry, B-VirusFree)Engineering | – | – | – | – | – |
| Nitrogen generation (in-house development)Engineering | – | – | – | – | – |
| Compressed air distribution / compressed air treatment / drying technology / compressed airEngineering | – | – | – | – | – |
| Compressed air analysis & measurement technology (consumption measurement, pressure dew pointTesting | – | – | – | – | – |
| Leak detection (piping inspection)Testing | – | – | – | – | – |
| Pneumatics (cylinders, valves, air treatment FRL, proportional technology)Engineering | – | – | – | – | – |
| Electromechanics (actuators, servo motors, gearboxes, drives/controls, frequency inverters)Engineering | – | – | – | – | – |
| Gas springs & dampers (Stabilus distribution)Engineering | – | – | – | – | – |
| Vacuum technology (vacuum generators, ejectors, VGS, vacuum conveyors, suction cups)Engineering | – | – | – | – | – |
| Engineering / planning / design of customer-specific componentsEngineering | – | – | – | – | – |
| Subassembly assembly / installation of complex systems / construction of complete compressed airAssembly | – | – | – | – | – |
| Compressed air piping construction from aluminium composite pipe (TransAir), Cu pipe or stainlessAssembly | – | – | – | – | Aluminium composite pipe, Cu pipe, Stainless steel pipe |
| Maintenance, repair and overhaul of piston compressors, screw compressors andAssembly | – | – | – | – | – |
| Preparation, support and follow-up of TÜV pressure vessel inspectionsTesting | – | – | – | – | – |
| Compressed air requirements analysis, energy saving potential calculation, economic efficiencyEngineering | – | – | – | – | – |
| Rental of rental compressorsEngineering | – | – | – | – | – |
9 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Oil-injected screw compressors | – | – | – | – | Norderstedt (Hamburg), Stuhr (Bremen) |
| Oil-free screw compressors | – | – | – | – | Norderstedt (Hamburg), Stuhr (Bremen) |
| Piston compressors | – | – | – | – | Norderstedt (Hamburg), Stuhr (Bremen) |
| High-pressure breathing air compressor (COMPACT LINE) | BAUER KOMPRESSOREN JUNIOR II, OCEANUS, PE 100 | – | 100–140 l/min, 225/330 bar | – | – |
| Mobile high-pressure compressor (PROFI LINE) | BAUER KOMPRESSOREN CAPITANO 140, MARINER 200/250/320 | – | 140–320 l/min, up to 420 bar | – | – |
| Rotary vane compressor | – | – | – | – | – |
| High-pressure container system | – | – | – | – | – |
| Nitrogen generation system (in-house development) | UNIMATIC | – | – | – | – |
| Speed-controlled screw compressor station | UNIMATIC/VS series | – | – | – | Lüneburg (reference Johnson Controls) |
Additional services
Reference customers
Quality and measurement technology
Compressed air quality is verified by pressure dew point measurement; consumption measurements, leak detection and TÜV pressure vessel inspections complement quality assurance. Reference projects include, for example, the organization of recurring internal strength tests on pressure vessels at LESER in Hamburg.
| Evidence | Norderstedt (Hamburg) | Stuhr (Bremen) |
|---|---|---|
| Pressure dew point measurement / air quality | ||
| TÜV pressure vessel inspections (preparation/support) | ||
| Compressed air consumption measurement |
History
- 1970
Founded as an engineering office for the distribution of technical products.
- 2013
New building and capacity increase.
- 2018
Acquisition of Drutec GmbH.