Laser fine cutting, laser welding, laser marking and fine bending in metals from 0.05 to 6 mm – from prototype to series production.
ACELtec Elektrotechnik und Lasertechnik
Aachen · Industriepark Rothe ErdeNew on Amplifa
About ACELtec
ACELtec Elektrotechnik und Lasertechnik is a laser fine-processing company in Aachen with experience in laser processing since 1989. The company cuts, welds and marks metals with a solid-state laser: laser fine cutting with kerf widths of 50 to 160 µm in sheets and strips up to 6 mm thick, fine cut holes from 0.2 mm diameter, laser welds with seam widths from approx. 100 µm, and laser marking and type plates in series with sequential data. In addition, laser-cut parts are finished in-house by fine bending, countersinking, threading up to M10, inserting press-in nuts and glass bead blasting, ready for installation. Materials processed include steels, stainless steels, spring strip steels, aluminium, non-ferrous metals as well as ceramics and special materials. Complete parts with grinding, milling, turning or EDM are produced via partner companies in the region. Production covers individual parts and prototypes as well as small and large series; customers are supplied in Germany, the Netherlands, Belgium, France and Luxembourg.
- Site
- Aachen
- Processes
- Laser fine cutting, Laser drilling / fine holes, Fine laser welds, Laser marking and type plates (serial numbers, scales, logos, DataMatrix codes), Edging and bending (fine bending with special tools), Further processing: countersinking, Threads up to M10, Inserting press-in nuts
- Materials
- Steel, sheet metal St37, St1203 (DC01), Stainless steel 1.4301, Stainless steel 1.4571, Stainless steel 1.4541, Spring strip steel C75S, Spring strip steel C85S, Spring strip steel C100S
- Certificates
- ISO 9001
- Founded
- 1989
- Industries
- Mechanical engineering, Electrical engineering, Fine sheet metal/sheet metal parts for series production
- 01
Consulting, feasibility checks and application trials
- 02
Laser fine cutting / laser drilling
- 03
Laser marking
- 04
Fine bending with special tools
- 05
Further processing (countersinking, threads up to M10, press-in nuts,
- 06
Complete machining via partner companies (grinding, milling, turning, EDM)
Sites
Aachen
DEProduction and office (Industriepark Rothe Erde)
- Lot size
- Single parts to large series
- Materials
- Steel, stainless steel, spring strip steel, aluminium, non-ferrous metals, ceramics
- Solid-state laser system for laser fine processing (cutting, drilling, welding, marking), working area 1000 × 800 mm per clamping
Parts
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Laser fine cuttingMachining | – | 1000 mm × 800 mm | – | Single parts – large series | St37, St1203 (DC01), 1.4301, 1.4571, 1.4541, C75S, C85S, C100S, 1.4310, AlMg1, AlMg3, Brass, Copper, Bronze, Silver, 90MnCrV8 (1.2842), Ceramics (aluminium oxide, silicon nitride), Rubber, Sealing material |
| Laser drilling / fine holesMachining | – | 1000 mm × 800 mm | – | – | Steels, Stainless steel, Aluminium |
| Fine laser weldsJoining | – | 1000 mm × 800 mm | – | – | Steels, including mixed joints |
| Laser marking and type plates (serial numbers, scales, logos, DataMatrix codes)Surface | – | 1000 mm × 800 mm | – | Series | anodised aluminium, Metals |
| Edging and bending (fine bending with special tools)Forming | – | 1000 mm × 800 mm | – | – | Steel, Stainless steel, Spring strip steel, Aluminium |
| Further processing: countersinkingMachining | – | – | – | – | Metals |
| Threads up to M10Machining | – | – | – | – | Metals |
| Inserting press-in nutsAssembly | – | – | – | – | Metals |
| Glass bead blastingSurface | – | – | – | – | Metals |
| Tube processing – contours in tubes (on request)Machining | – | 1000 mm × Ø 150 mm | – | – | Metals |
| Consulting and feasibility (laser-friendly design, application trials)Engineering | – | – | – | – | – |
1 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Solid-state laser system for laser fine processing (cutting, drilling, welding, marking) | – | – | Working area 1000 × 800 mm per clamping | – | Aachen |
Additional services
Quality
Quality assurance is carried out through application trials, feasibility checks and precise laser fine processing with kerf widths of 50 to 160 µm; certifications are not stated on the website.
| Evidence | Aachen |
|---|---|
| ISO 9001 |
History
- 1989
Start of experience in laser processing
- 2005
Founding of ACELtec Elektrotechnik und Lasertechnik by Dipl.-Ing. Detlef Manzel