Development, PCB layout and manufacturing of electronic assemblies, devices and systems as an independent E²MS service provider.
tecnotron elektronik gmbh
Weißensberg (Headquarters) · Sigmarszell (Plant 2)New on Amplifa
About tecnotron
tecnotron elektronik gmbh is an independent, family-owned E²MS service provider (Electronics Engineering and Manufacturing Services) based in Weißensberg on Lake Constance. The company develops electronic assemblies, devices and systems from concept to series maturity: hardware development, embedded software, FPGA firmware, mechanics and PCB layout are closely integrated with its own electronics manufacturing. Production is carried out on a contract basis on two SMD/THT assembly lines, including one line with 52,000 components/h, inline vapor phase soldering and inline 3D AOI; in addition, HDI circuit boards, vapor phase soldering, potting, varnishing, X-ray analysis and assembly of assemblies and devices are offered. Acceptance criteria follow IPC-A610 Class 2/3 and ECSS, with manufacturing partly performed in an ISO 6 cleanroom. Customers come from aerospace, defense, medical technology, industry, measurement and sensor technology, e-mobility, rail technology as well as communications and consumer electronics. Around 180 employees generate revenue of over EUR 31.79 million.
- Site
- Weißensberg
- Processes
- Hardware Development, Embedded Software, FPGA Firmware, Mechanics/Engineering, PCB Layout, Electronics Manufacturing (SMD/THT), Vapor Phase Soldering, X-Ray Analysis
- Materials
- SMD/THT Assembly, Vapor Phase Soldering (ASSCON VP6000 Vacuum / VP2000 Inline), Reflow Soldering (Rehm), HDI Circuit Boards with Fine-Line Technology, X-Ray Analysis, Automated Potting and Varnishing, Laser Marking, BGA Rework and Reballing
- Certificates
- ISO 13485:2016, DIN EN ISO 14001:2015, EN 9100 (includes ISO 9001), ISO 14064-1, EN 9100 (incl. ISO 9001), ISO 14001:2015
- Founded
- 1978
- Employees
- 180
- Industries
- Aerospace, Defense, Medical Technology, Industry, Measurement and Sensor Technology, E-Mobility and Automotive
- 01
Hardware/Software/Mechanics Development
- 02
PCB Layout
- 03
Material Logistics
- 04
SMD/THT Assembly and Vapor Phase Soldering
- 05
Potting, Varnishing, Laser Marking
- 06
Assembly of Assemblies and Devices
- 07
Testing (AOI, ICT, FPT, BST, Functional Tests)
- 08
Environmental Tests and Acceptance Tests
Processes and Technologies
SMD/THT Assembly
Assembly of circuit boards and HDI boards on two lines, from prototypes to large series.
Vapor Phase Soldering (ASSCON VP6000 Vacuum / VP2000 Inline)
Consistent soldering quality without temperature profile adjustment, for lead-free (RoHS) and leaded soldering.
Reflow Soldering (Rehm)
For assemblies with components not suitable for vapor phase soldering.
HDI Circuit Boards with Fine-Line Technology
Design and assembly of high-density circuit boards, including high-speed and high-power as well as flexible boards.
X-Ray Analysis
Optical inspection of non-visible solder joints on the assembly.
Automated Potting and Varnishing
Protection of electronic assemblies for demanding operating conditions.
Laser Marking
Serial number identification for traceability at batch level.
BGA Rework and Reballing
Component replacement to rescue components and assemblies.
Cleanroom Manufacturing ISO 6
Manufacturing of highly sensitive electronics under strictly controlled conditions.
Test Systems (tecTESTER, tecFPGA, tecTCL)
Electrical testing methods such as ICT, FPT, BST and functional tests up to vibration testing and environmental tests.
Locations
Weißensberg
DEHeadquarters, development, PCB layout and manufacturing
- Lot size
- Prototypes to large series
- Materials
- Electronic assemblies (SMD/THT, HDI)
- Two SMD/THT assembly lines (52,000 components/h)
- Inline vapor phase ASSCON VP2000
- Vapor phase soldering system ASSCON VP6000 Vacuum
- Rehm reflow system
- Inline 3D AOI
- Fancort Flexsystem (component forming)
- Flow box ISO Class 5
- Vibration test system
- Climate chambers
- X-ray
- Vertical storage lifts (>13 m, approx. 84,500 storage locations)
Sigmarszell
DEPlant 2 electronics manufacturing
- Materials
- Electronic assemblies
Components and Reference Projects
Inside the production
Industries
Additional services
Reference customers
Quality and Certifications
The quality and environmental management system is certified to EN 9100 (includes ISO 9001), ISO 13485 and ISO 14001; greenhouse gas emissions are verified according to ISO 14064-1. Testing includes AOI/3D AOI, ICT, FPT, boundary scan, functional tests, vibration tests, climate tests and X-ray according to IPC-A610 Class 2/3 and ECSS.
| Evidence | Weißensberg |
|---|---|
| EN 9100 (incl. ISO 9001) | |
| ISO 13485:2016 | |
| ISO 14001:2015 | |
| ISO 14064-1 |
Company History
- 1978
Foundation of tecnotron elektronik
- 1985
1st construction phase of own building in Weißensberg
- 1990
2nd construction phase in Weißensberg
- 1992
Expansion of services in hardware and software development
- 1994
Expansion of services in electronics manufacturing
- 2000
3rd construction phase in Weißensberg
- 2002
Enlargement of the electronics manufacturing Plant 2 in Sigmarszell
- 2007
Certification to EN 9100
- 2009
Planning of new building
- 2011
Foundation for the future through the young generation
- 2012
Move into the new building on the A96, exit Weißensberg
- 2016
Handover to the second generation (Florian Schemm, Alex Weyerich)
- 2018
Certification to ISO 13485 (07.02.2018)
- 2022
Compensation of the remaining CO2 footprint, verification according to ISO 14064-1
- 2024
Expansion of production and logistics area
- 2025
High-end upgrade with ISO 6 cleanroom, smart warehouse logistics and sustainable energy concept, over 1,000 m² of additional space