Individually manufactured LED luminaires for underwater, sports, industrial and street lighting.

VisioPartner GmbH

Hofstrasse 4, 9620 LichtensteigNew on Amplifa

2007Start of underwater luminaires

Lichtensteig (CH)Company headquarters with own workshop

IP68Ingress protection rating of Reservoir luminaire Aquasol2

14'000 lmLuminous flux Aquasol2 (up to 140 W)

About VisioPartner

VisioPartner GmbH is a family-run lighting technology company based in Eastern Switzerland, specialising in outdoor and underwater lighting. The company plans lighting systems including lighting calculations, manufactures luminaires in its own workshop in Lichtensteig and carries out the installation including control technology (powerline, radio, DALI/PMW/DMX). A speciality is the lighting of water reservoirs, pump shafts and water catchments: the Reservoir luminaire Aquasol2, developed since 2007, achieves IP68 rating with a stainless steel housing, is configurable in output up to 140 W and uses materials certified for use in drinking water (KTW, SVGW). The electronics are not installed in the luminaire itself but in the dry anteroom. Further application areas include sports facilities, industrial and large-volume halls (InduTrack system), commercial and agricultural uses, street lighting as well as nostalgic old-town lanterns. Production takes place predominantly in Switzerland (Swissmade) using aluminium, aluminium die casting, stainless steel, impact-resistant polycarbonate and glass.

Site: Lichtensteig
Processes: Lighting design and lighting calculation (light planning, illumination calculation according to SLG, In-house production of luminaires in the workshop (luminaire assembly/manufacturing), Assembly and installation of lighting systems (InduTrack suspended-mounted or direct installation, Electrical installation and installation of LED floodlights, cables, distribution boxes and circuit, Individual adaptation/output configuration of LED luminaires (custom-made luminaires), Lighting design and lighting calculation, Individual luminaire production in own workshop, Cost-effectiveness comparisons for lighting concepts
Materials: Aluminium, Aluminium die casting, Stainless steel, Polycarbonate (impact-resistant), Glass
Certificates: Product certification (underwater luminaires; materials for drinking water, KTW/SVGW (drinking water, product certification)
Industries: Water supply (reservoirs, pump shafts, water catchments), Sports facilities (tennis, football, equestrian sports, snow sports), Industrial and large-volume halls, Commercial and agricultural use, Municipalities / street lighting, Open-plan offices / shopping centres / schools

01
Lighting design and lighting calculation
02
Individual luminaire manufacturing in own workshop
03
Assembly and installation incl. control technology

Materials and Processes

Aluminium

Housings and luminaire cores of individual luminaires for commercial and warehouse use as well as floodlight housings.

AlGi

Aluminium die casting

Housings of IP65 ceiling and wall luminaires for indoor and outdoor areas.

Stainless steel

Housing of the Reservoir luminaire Aquasol2 as well as mounting brackets of floodlights.

Polycarbonate (impact-resistant)

Covers of individual luminaires as well as IP65 ceiling and wall luminaires.

Glas

Glass

Covers on round luminaires.

Locations

Lichtensteig

Company headquarters / workshop (luminaire production)

Materials: Aluminium, aluminium die casting, stainless steel, polycarbonate, glass

Components and Products

**Luminaire Adrett Vital3Protect**Luminaire assembly · Commercial/Agriculture

**Controller**Control technology · Sports facilities

**Ceiling and wall luminaire Kindu**Aluminium die casting · Outdoor area

**InduTrack angle connector**Accessory part · Industrial/large-volume halls

Inside the production

Case Study: Reservoir Sonnebergli, Ruswil

Case Study: Tennis facility TC Rickenbach ZH

Case Study: Equestrian centre Thurfeld, Sulgen

Lighting for commercial and agricultural use

Industries

Water supply (reservoirs, pump shafts, water catchments)Sports facilities (tennis, football, equestrian sports, snow sports)Industrial and large-volume hallsCommercial and agricultural useMunicipalities / street lightingOpen-plan offices / shopping centres / schoolsCommercial and agricultural use (stables)

Processes & technical limits

Processes	Tolerance	Max. part	Weight	Lot size	Materials
Lighting design and lighting calculation (light planning, illumination calculation according to SLGEngineering	–	–	–	–	–
In-house production of luminaires in the workshop (luminaire assembly/manufacturing)Assembly	–	–	–	–	Aluminium, Stainless steel, Polycarbonate, Glass, Aluminium die casting
Assembly and installation of lighting systems (InduTrack suspended-mounted or direct installationAssembly	–	–	–	–	–
Electrical installation and installation of LED floodlights, cables, distribution boxes and circuitAssembly	–	–	–	–	–
Individual adaptation/output configuration of LED luminaires (custom-made luminaires)Assembly	–	–	–	–	–

Additional services

Lighting design and lighting calculationIndividual luminaire production in own workshopCost-effectiveness comparisons for lighting conceptsAssembly / installation (powerline/radio controls, DALI/PWM/DMX)Planning and realisation of sports facility, street and underwater lighting

Reference customers

TC Rickenbach ZH (tennis facility)Equestrian centre Thurfeld, SulgenReservoir Sonnebergli, RuswilReservoir Berg, Alt St. JohannReservoir Brachwasser, NebikonReservoir Mühlhalden, BruggSports facility Urnäsch

Quality and Certification

The reservoir luminaires are tested and the materials used are certified for use in drinking water (KTW, SVGW). The Aquasol2 achieves IP68 rating (dust-tight and waterproof).

Evidence	Lichtensteig
KTW/SVGW (drinking water, product certification)

Company History

2007
Start of work on underwater luminaires
2007
Development of the Reservoir luminaire Aquasol2, in use since then in numerous Swiss reservoirs